Front cap for Fujifilm 1.4x teleconverter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Front cap for Fujifilm 1.4x teleconverter or X-mount camera body, built-in support
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 25
- Makes
- 0
- Views
- 68
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The model has built-in support with 0.05 mm clearance which is made for printing using permanent marker as a release agent. Add pause at the start of the corresponding layer and paint support with permanent marker. Do not overdo it! Make it a lazy job, otherwise next layer won't stick.
Alternatively, you could split it into bodies and use slicer supports.
Top of the cap is printed with bridges, make sure first layer of bridges is not detected as overhangs. I ended up with setting “Bridge counterbore holes” to “Partially bridged”.
I ended with a cap that sits firmer in the body / converter which I like. If seams are placed on the outside of latching ridges, they may interfere with fit. Mine were on the corner and filed them a bit and added chamfers to the model.