Goldenmate UPS Under Desk Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Minimal under-desk mount for the Goldenmate 1000VA 600W UPS
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 28
- Makes
- 0
- Views
- 348
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
7/9/25 - A small oversight in the design prevents the UPS from being able to slide through the brackets because of the feet/pads on the bottom of the UPS. A revision is coming soon that allows some space on either side to clear the feet, allowing the brackets to remain installed whenever removing the UPS.
---
This will hold the Goldenmate 1000VA/600W UPS securely underneath your desk (or wall mounted). The design is split into two pieces - the main body and a retainer bracket that secures the UPS in place. The mounting holes are designed for #8 wood screws.
Print two pairs of parts for one UPS mount. Print as oriented with no supports, at least 4 walls, 4-5 top/bottom layers, and at least 25% infill.
You will the following hardware:
- 8x M3 heat inserts
- 8x M3x8 BHCS
- 4x #8 wood screws of an appropriate length for your desk thickness
Assembly:
- Use a soldering iron to insert all the M3 heat inserts into both main brackets.
- Secure one retaining ring to one of the main brackets (note the orientation).
- Slide the bracket onto one end of the UPS and use it as a guide to place it where you want it. Mark the holes, remove the UPS temporarily, then install the first bracket with two #8 wood screws.
- Assemble the other bracket on the opposite side of the UPS, slide the UPS into the mounted bracket, and follow the same process as step 3.
- To insert or remove the UPS, unscrew one of the retaining rings from the bracket, slide the UPS in, then reattach the retaining ring.