1 / 1
Sovol SV08 41mm exhaust duct adapter for Mars Mate — image 1

Sovol SV08 41mm exhaust duct adapter for Mars Mate

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Adapter to connect the SV08 enclosure exhaust port to a 41mm diameter (OD) duct, such as that used on the Mars Mate

Rating
0 / 5
Likes
9
Downloads
41
Makes
0
Views
287
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

Adapter to connect a 41mm diameter (OD) hose to the SV08 enclosure exhaust port. This is the diameter of the Mars Mate air purifier hose, so that the printer can be connected directly into the Mars Mate. If the hose connection is slightly loose, wrap the hose connector with a piece of electrical tape or similar.

Can be used with or without the fan (fan would be placed between enclosure and this adapter).

Print in the provided orientation (standing on the hose end) to ensure that the hose port dimensions are accurate. Use supports; auto tree supports work fine, only one flat edge of the backplate and the very top of the loft needs to be supported. A 5mm or greater brim is suggested, and PETG or ASA recommended.

Tags