Biohazard valve cap
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Just a unique valve stem cap for automotive tires.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 41
- Makes
- 0
- Views
- 208
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Creative Commons — Attribution — Noncommercial
General:
A simple valve cap with Biohazard valve cap with built-in threads.
Why I designed this:
I designed this as a fun experiment with small threads and small detailed MMU designs.
Printing notes:
Layer height: .15 or finer is ideal
Recommended Material: PLA or better(depends on your climate. ASA will hold up better)
Supports: None
Infill: Any
Walls: 2-3
Other Modifiers: Print as oriented
Material Quantity: ≈3.8 grams per set
I printed from PLA on Prusa XL 5t at .15 layer height with 15% rectilinear infill.
Cautions and updates:
If the threads are too tight, adjust your XY compensation value. For me they were perfect and strong as-is with stock settings.
_____________________________________________________________________________________________________________
Don’t forget to follow me, post a make, leave a like, or tell me what you don’t like so I can make improvements.
Thanks, and Happy Printing!
Also check out:
https://fabtechmfg.square.site/