Prusa Nozzle Cleaning Tool
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remove nozzle clogs easily with this tool
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 52
- Makes
- 1
- Views
- 785
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
You have a cloged nozzle ? No problem with this tool.
How to use:
Open the idler door and heat the nozzle to the matching filament temperatur
Remove all visible filament
Insert the tool from above all the way down in the nozzle and push gently.
After all filament has left the nozzle you are done, close the idler door and feed new filament.
This tool consists of a pretty standard handle and a stainless steel rod, diameter 1,5mm, a little bit smaller than the standard filament. Cut the rod to 240mm, the length is important, its a long way down the nozzle tip.
Glue the rod into the handle
For the stainless steel rod google for
Nirosta-Draht 1,5 mm /1000 mm federhart
or
100mx1.5mm DIY Toy