Counting matching models…
The original button is easily broken and the scissors could be fall into two pieces. Figmint Stainless Steel Kitchen Shears is available from Target.…
This is a high-precision CAD model of a full metal stainless steel push button designed for use in electronics, specifically for 230V applications. The model is accurately scaled to match the real-world dimensions of a standard push…
Tokyo Marui Dual Stainless Holster with Tactical SF XC1 Flashlight To fix the lock, it needed a piece of a paper clip 37mm. And you can make a hook on the clip to a better fix. Suggested config print: layer height: 0.2 wall loops: 6…
Paper backups fail. Ink fades. Hardware wallets break. This 3mm stamping jig is designed to help you create a durable, offline backup of a 12–24 word crypto seed phrase (or any critical secret) by stamping directly into stainless steel…
Un support simple pour couvercle fin en inox à coller au double face ou à visser. Une deuxième partie en miroir doit être imprimer également. Imprimé en PLA, en 0.24, sans supports. A simple support for thin stainless steel lids, which…
Replacement lid for Ikea stainless steel cotton swab dispenser (I cant recall the item name).
The embossed version of the boot has a smiley face texture. The smooth one is well... smooth. It won't work with rigid materials unless the model is altered because it has a 0.5mm interference fit. Recommended print settings: material:…
Morgan 30L Stainless Steel Pedal Bin — Lid Hinge Replacement The plastic hinge cap on the Morgan 30L Stainless Steel Pedal Bin (Bunnings SKU p4520215, ~$28.95) is a known failure point. The original part becomes brittle over time and…
The stainless steel drying hanger is very easy to use and I have used several of them, but the welded part of the frame came off, so I made a repair part. put the wire that came off in the 3mm hole and fit it into the frame.
Very tight fit, you may have to stretch it a bit in x and y if it’s too tight.
Soap Holder for some Stainless Steel sinks we have at work. The sink edge has a 18.75mm diameter curve. These are PETG, no supports Print on the edge.
This is a high-precision CAD model of a full metal stainless steel push button designed for use in electronics, specifically for 230V applications. The model is accurately scaled to match the real-world dimensions of a standard push…
Vacuum adapter that fits Ryobi Orbital Sander ROS300 output to Ozito 1250W 12L Stainless Wet And Dry Vacuum
After several weeks of use I lost (allegedly broke in the course of back movement of the boat), part of system of release. I made by it replacement for it. It is 8 mm thick instead of 3mm as at an original detail. Instructions I printed…
Designed to fit this 24x18x34 inch stainless steel work table. License This project is Open Hardware. All source files are licensed under the CERN-OHL-W v2 . You may redistribute and modify this documentation and make products using it…
A thing to hold Enduro Bearings' Stainless Steel Bearing Bunch Set (BRT-030). Bin size is 4x5x3.
After the hinge broke for my Stainless steel, round, trashcan i've created a re enforced one that is still going strong for 2 years. The hinge is best printed with: Walls: 3 Infill: 15% or 20% Extra: cut 1.55 of the top hinge part like in…
Simple tray and case for the PITTSBURGH Stainless Steel Carving Set or the hook & pick set that Harbor Freight sells. I also added slots for 8mm x 2mm magnets for times I leave the tray laying around out of the case. Very since design and…
I broke the handle on the painting knife that came with my printer. This one replaces it. Shank hole is 17mm deep and 5mm in diameter. Print with enough walls to ensure the hole portion at least is all solid or use appropriate print…
Print and enjoy your own Glyphid Slammer. Original 3D model from Jack Frost has been modified for easier printing and to receive the “Chillout Life - Stainless Steel Pint Cups". Google the quotes to find the right sized cup for your…
Tokyo Marui Dual Stainless Holster with Tactical SF XC1 Flashlight To fix the lock, it needed a piece of a paper clip 37mm. And you can make a hook on the clip to a better fix. Suggested config print: layer height: 0.2 wall loops: 6…
1/4 " Jess Em Jig The stainless steel Jess Em doweling jig (thin) are good jigs. In some situations, the jig is too thin to locate on a dowel to drill mating holes. This spacer shims up the jig so you can locate on the dowel. This shim…
Stainless steel jaws magnetic Holder request 3 magnets 8*2 https://amzn.to/41A2QSg or https://s.click.aliexpress.com/e/_oDZGdM4 pause the printing to come and place the magnets at layer 12 (0.2mm layer) Version magnets 6x3…
This is a 20mm length of 8mm rod, the video screen cast of how to use this can be found at https://youtu.be/Woce0xhP47s Part of my collection of random Fusion 360 Parts, I have uploaded them to their own git at…
Remix of RonnynnoRMan work for my old 58mm stainless steel Bialetti venus 4tz with longer funnel for more stable design
Scaleable Stand for Stainless Steel Coffee Filter - example for Coffee Gator 300/400ml Pour Over Brewers - it fits Most Tea and Coffee Cups Maximum Cup Size: d = 85mm h = 125mm Maximum diameter of cup Bottom = 60mm Maximum Filter Size d =…
Added support for Stainless Steel Jaws on the right part (the one placed at the front) and made a slight design modification to avoid a sharp edge on the side. This is an addition to this model:…
I designed my own wordclock becuase i wanted one that looks more professional then all the printed ones. Frontplate you can get on eBay or other marketplace apps. This is the 45x45cm version. I found my Stainless Steel plates for 65€…
Did you break the handle on that great 64oz growler / water bottle you got at ALDI or maybe on Amazon? Use this model to print a replacement. The handle is attached to the growler's lid with a metal pin you can poke and pull out using a…
I remixed a balcony handle into this handle replacement for any travel stainless steel mug w carabiner with the similar design
After making some versions of the original heart charm, it was time to see whether I could get my hands on a more permanent print. This model was printed for me. I simplified the model due to the resolution of the selective laser melting…
Glue the small round with the groove on top of cap for the bottle. Printed with PETG. I used Super Glue (cyanoacrylate) additionally I prepared the surfaces with sanding paper and activator for plastics. The double loop is have printed…
Designed to allow simple alignment of 3/8" X 3" Stainless tags for laser etching. Printed from PLA at .2LH in about 2 hours. Location of the center of the pattern is inlaid to remind me where to center the lightburn pattern for accurate…
Used the excellent stainless steels jaw version and added support for 5 bed plates instead of 3.
I have a sailboat. On the bow are cleats used to tie up the boat. Jib sheets (lines used to control sails) will tangle on the cleat, requiring someone to go to the front and untangle them. These guards snap around the cleat and protect…
I broke my lid so finally got round to making another one.
UPDATED .STL FILES FOR BETTER FIT 06/30/16. TWO NEWER VERSIONS, BETTER FIT. I have a Kenmore 106.72153111 23 CUFT refrigerator in stainless steel. I has nice brushed aluminum handles, but one end (of each) has a poorly designed gray…
I've used bolt-on style printed pullies and sprockets for years now, but lately I've been experimenting with different custom drive systems and branched out into the word of press/push fit hub adapters. As you all know, 3D printed parts…
A pot brim ABS holder for my 2200 watt weldless stainless heating element. I will be using this on my 35l Brewzilla Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: .2mm Infill: 20% Filament:…
The original gasket for the Surefeed MBOWL Stainless Steel Cup becomes brown and brittle over time losing the contact to the bowl. This model, printed out of TPU or TPE, can replace the old gasket. Because it fits tight over the bowls…
Die Edelstahlplatte vom Ooni Karu Pizzaofen hat normalerweise nur Warnhinweise eingraviert – eignet sich aber hervorragend als Teigschneider. Mit dieser 3D-gedruckten Halterung wird die Platte zu einem praktischen Küchenwerkzeug. Einfach…
Reduced Overflow Accessory for Johnson Acero Stainless Steel Sinks In some sink models, the overflow outlet might be at the same height as the faucet. If the faucet has a very large base, it's impossible to install the overflow outlet.…
This is a remix of SnowHead's Replacement Gasket for Surefeed MBOWL Stainless Steel Cup . The only difference is that the top of the gasket is 1mm higher, allowing for a closer seal when the lid closes. Needs to be printed in a flexible…
This is my attempt at modeling the thermowell purchased off of AliExpress. https://www.aliexpress.us/item/32568059256227
Designed to hold a stainless-steel cup commonly available online (58mm tapering to about 45mm, and about 70mm tall. with a 1mm thick support ring near the top). The stainless-steel cup, besides looking nicer than the clear plastic one,…
If you own the HALLY Stainless Steel Equipment Stand 28x24 w/ under shelf and want to roll it around on 3” casters , you’ve probably noticed the legs are just a bit oversized for most common stem mounts. And if you’re running a Spike…
These are spacers for a 9mm (10mm works too, don't be me, buy 9mm belts) for the very cheap (about ⅓ of the others I could find when the bearings are included) laser cut stainless set by Funssor…
For use the the (very cheap) Funssor stainless steel laser cut set (https://www.aliexpress.com/item/1005007038349339.html). You'll need the unmodified motor spacer from 3DPrintingMods/AluminumG/smokescreens github. Spacers for the XY…
Paper backups fail. Ink fades. Hardware wallets break. This 3mm stamping jig is designed to help you create a durable, offline backup of a 12–24 word crypto seed phrase (or any critical secret) by stamping directly into stainless steel…
Two types of plugs to close open ends of 25/2mm tubes on MPCNC. One type with cables and one without cables. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.16 Infill: 20% Filament: Noyes PLA…
This water bottle is prone to denting and breaking, especially at the bottom, so I designed this. Amazon
The organizer is held in place using a magnetic holder mounted on the outside of the tray. This allows the organizer to be easily removed and reattached as needed. The magnetic holder requires two 10×10×10 mm neodymium magnets, and the…
Un support simple pour couvercle fin en inox à coller au double face ou à visser. Une deuxième partie en miroir doit être imprimer également. Imprimé en PLA, en 0.24, sans supports. A simple support for thin stainless steel lids, which…
A resize of Kartikey Anand's 3-cup moka pot accessories, measured and test-fitted for a Primula 6-cup stainless steel coffee basket. The exterior diameter of the coffee basket's upper flange is 78.1mm in diameter. I used ~78.6mm as the…
Replacement lid for Ikea stainless steel cotton swab dispenser (I cant recall the item name).
The embossed version of the boot has a smiley face texture. The smooth one is well... smooth. It won't work with rigid materials unless the model is altered because it has a 0.5mm interference fit. Recommended print settings: material:…
Morgan 30L Stainless Steel Pedal Bin — Lid Hinge Replacement The plastic hinge cap on the Morgan 30L Stainless Steel Pedal Bin (Bunnings SKU p4520215, ~$28.95) is a known failure point. The original part becomes brittle over time and…
This holder for stainless steel screws are created because stainless steel screws isn't magnetic and therefore it can be a two handed job. The holder is created to fit a standard bit holder and when mounted, it is important, that there…
This is the model of NeoVision HS3. We bought this mirror for Omnidirectional camera ( http://en.wikipedia.org/wiki/Omnidirectional_camera ). By using this mirror, you can create a 360 degree view of image. The surface equation is…
I ordered Steel Ice Cubes from Aliexpress but the case was broken. This case can hold 27x27x27 cubes. I attached a few versions and the scad file. Print Settings Printer: Artillery Genius Pro Rafts: No Supports: No Infill: 20 Category:…
A simple female threaded foot which screws onto the Capita plate which can be attached to any item of furniture. I used this as a substitute to reduce the height of the furniture to fit under a shelf, instead of the Capita leg. 3MF file…
There are many reels like this out there for Paterson tanks. I prefer steel tanks, so this is my version. Print 2 each of Plug, Top, outerTube, and Teeth, and 1 centerTube. The parts should press fit together. Depending on your printer's…
I shoot and home-develop a lot of different film formats, and after releasing a few different reels for lesser used formats (110, APS, disc, etc), I started getting approached by people wanting one of equal quality for the Minox 8x11…
I shoot and home-develop a lot of different film formats, and I found myself unsatisfied with the “solutions” I had for developing 110 film. I made a version specifically for my Jobo dev tanks, and got a lot of feedback from people asking…
If you want a snug fit, you'll need to play around with clearance via the provided Fusion 360 file. Should be easy to print.
This is a box to keep everything together instead of a Ziploc bag in a freezer. made for https://shop.coles.com.au/a/fletcher/product/ice-cube?CID=cdc:slipper:accessories_icecubes
to print the one piece scraper pause the print and install the blade with painters tape
My wife wanted us to stop using plastic drinking tumblers and straws, but I was unable to find any glass tumblers that held enough water. I drink a lot of water, so I wanted something that would hold at least 32oz. I found these 32oz…
The original case broke after I dropped it. Four 28mm ice cubes fit in the case. Print in given orientation.
The scratch gauge is designed to fit one of those stainless steel rulers. A ruler 25mm wide and .5mm thick fits niceley. Requires a M5 screw / nut combination for assembly. The STL should already have the correct orientation for printing,…
For the support settings, please see the attached image. I used the GereenTec material from Extrudr because it is suitable for the dishwasher. Temperature resistant up to approx. 110°C. Print Settings Printer: Homemade Rafts: No Supports:…
Adaptor is 42mm OD including thread, 6mm pitch. Fits a turner shaft diameter of 20mm. Fitted for Crofton brand from Aldi. Should fit other brands using their OEM's design, but not tested.
I wanted a breathable mouth gag that I could integrate with ropes, but didn't like any of the available options on thingiverse at the time. This was probably my second or third design. Straightforward and simple, designed on tinkercad.…
Designed for extra low volatege operation, do not cover live part of circuit, only holds
This is a 3D design of a stainless steel rectangular tray available through eBay and AliExpress (with the magnets removed). The tray dimensions are 136.5mm by 54mm at the base and 13.5mm high with tapered sides. The tray has a brim which…
There are many reels like this out there for Paterson tanks. I prefer steel tanks, so this is my version. Print 2 each of Plug, Top, outerTube, and Teeth, and 1 centerTube. Included gcode is a complete reel as a single print in Hatchbox…
The stainless steel top was corroding due to salt water and various chemicals used in testing. This is a friction fit cover to prevent further damage. Link for the mixer if you would like one of your own.…
Hardware needed: METMAXX stainless slipjoint knife without scales 2* m3 screws 2* m3x4x5 heat threaded inserts The model is divided into four parts: one body part for each side and one inlay for each side to print in another color or…
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker Thermos Stainless King 470ml/16oz Handle & Base. No supports…
Ozark Trail 32 oz Vacuum Insulated Stainless Steel Tumbler handle 3-4 walls 15-25% infill PLA+ , PETG or ASA something water resistant.
This TPU bumper protects your Zojirushi Stainless Steel Mug 16oz from dents and bumps. Dishwasher safe.
The Lid is for the "The Legend of Zelda Link's Travel Mug" made by Paladone . Make sure it is waterproof or 100 % full. You don't want liquid inside because it will get mouldy. Caution! Make sure the filament you are using is food safe.…
This is a clip system that allows you to mount to the front edge of the Rockpoint tables from this Amazon listing, I used it on the 60" long variant. Table I specifically used it to mount the Brewhardware RIMS tube to the front. The…
Remixed from the original, which fit the rack great (even without zip ties), but was a little tall, and I thought the screw on bottom issue could be solved. You'll need supports under the part that attaches to the rack (which I included…
Current models of Thüros grills come with rubber feet. For the old model I use this is not available. So I printed my own in TPU. These feet will work for anything that has 90° corners and is made from steel of ~1mm thickness. Printed…
The stainless steel drying hanger is very easy to use and I have used several of them, but the welded part of the frame came off, so I made a repair part. put the wire that came off in the 3mm hole and fit it into the frame.
Very tight fit, you may have to stretch it a bit in x and y if it’s too tight.
End Cap Cover Solar Rail for Profile For Stainless Profile 6x35mm, it help to prevent injury from shar edge (krytka na NEREZ profil k solárním panelům).
These holders raise stainless steel bowls off the ground 100mm to the top of the bowl, or 65mm to the bottom of the bowl. Raising your animals food improves the animals ability to eat and digest in a better manner. These are designed to…
DAISO Stainless tray (20.5*14cm) becomes a desiccant cont. You can heat the desiccant without removing it from the tray. Please print with the following settings: Nozzle 0.4mm Height 0.2mm PETG You will need: Heat insert nut :M3*d5*4mm…
This remix just adds another electronics box and adjusts the servo holder for a stainless steel filling pot.
This particular STL/3mf file contains geometry to make the handle for my 20 Ozark Tumbler, which is approximate 87mm in diameter. Note that the ring is actually slightly tapered so that in matches the tapering/curvature of the actual…
