1 / 1
Magnetic Sink Tray Organizer For Stainless Sinks — image 1

Magnetic Sink Tray Organizer For Stainless Sinks

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A magnetic sink tray organizer designed to be installed in a stainless steel sink tray.

Rating
0 / 5
Likes
4
Downloads
6
Makes
0
Views
94
Reviews
0

Updated at source:

Model information

Category
Kitchen
License
Creative Commons — Attribution — Noncommercial

The organizer is held in place using a magnetic holder mounted on the outside of the tray. This allows the organizer to be easily removed and reattached as needed.

The magnetic holder requires two 10×10×10 mm neodymium magnets, and the organizer requires two 10×10×5 mm neodymium magnets.

When 3D printing, insert a pause at 70.00 mm for the organizer and at 11.20 mm for the magnetic holder to allow for magnet insertion.

During installation, apply glue to the magnetic holder to prevent it from sliding down when the organizer is removed. Place the printed bottom side (the thinner side) against the tray.

If you prefer an adjustable sink tray organizer without magnets, you can find one here:
https://www.printables.com/model/163631-adjustable-sink-tray-organizer

Tags