1 / 2
Creality K1/K1 Max: Toolhead Rear Cable Guide
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Keeps extruder wires safe and tidy
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 70
- Makes
- 0
- Views
- 925
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The rear of the K1 series toolheads has a super fiddly cable management hook for the extruder wires. This guide made things much easier when I installed a new DXC extruder (highly recommended btw!).
Ideally, you just screw through the existing holes in the toolhead with M2x8mm bolts. I only had longer ones handy and maybe I'll cut them down one day but for now they work fine.
I'd recommend printing with 0.4mm nozzle and 0.2mm layer height to preserve detail. And you must use a heat resistant filament such as ABS/nylon etc.