1 / 2
Buoy weight attachment end (Holdcarp)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Buoy weight attachment end for holdcarp buoy
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 5
- Makes
- 0
- Views
- 46
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Buoy weight attachment end for holdcarp buoy with hexagonal nut its copy of original part but without plastic coil. Tested with PETG-CF and normal PETG
Infill 20%
No supports
3 walls
Layer 0,2 mm
What you will need for the composition:
- 1x M8 hexagonal nut
- Some piece of rope
For inserting nut:
- Stop printing at layer 59, insert nut and continue printing
Stop at this layer work only at using 0,2 layer height!!
Happy printing and fishing