1 / 1
Monster in My Pocket Display Board (series 1 - 48 slots) — image 1

Monster in My Pocket Display Board (series 1 - 48 slots)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Modular display board for 48 Monster in My Pocket figures – printable and easy to assemble.

Rating
0 / 5
Likes
8
Downloads
68
Makes
0
Views
915
Reviews
0

Updated at source:

Model information

Category
Wall-mounted
License
Creative Commons — Attribution — Noncommercial

This is a custom modular display board designed to hold all 48 figures from Monster in My Pocket – Series 1 (original 90s scale).

The set includes all the parts needed to build the full board, which must be assembled using glue (super glue or cyanoacrylate recommended).

📦 Included parts:

2 × 3×3 slot modules

2 × 3×3 slot modules with base

1 × 2×3 slot module

1 × 2×3 slot module with base

2 × logo plaque holder

2 × wall-mount brackets (screwable)

🧱 Each slot is sized to fit a single original MIMP figure.
🛠 All parts are meant to be glued together after printing to form the final board.

🔹 Note: The stickers shown in the photos are included as separate PDF files.
They were custom-made by me, using a recreated layout and fonts similar to the originals.
They are not official, and not designed to fit any original sticker set.
These files are provided for personal use only – no resale, no redistribution, no commercial use.
All copyright for the original Monster in My Pocket brand belongs to its respective owners.

🖨 Recommended print settings:

Material: PLA

Layer height: 0.2 mm

Infill: 10–20%

Bed size: 220×220 mm or larger

🎨 The display can be painted or left as-is. Clean, minimal look suitable for any collector.

Tags