1 / 1
Monster in My Pocket Display Board (series 1 - 48 slots) — zdjęcie 1

Monster in My Pocket Display Board (series 1 - 48 slots)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Modular display board for 48 Monster in My Pocket figures – printable and easy to assemble.

Ocena
0 / 5
Polubienia
8
Pobrania
68
Wydruki
0
Wyświetlenia
915
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Wall-mounted
Licencja
Creative Commons — Attribution — Noncommercial

This is a custom modular display board designed to hold all 48 figures from Monster in My Pocket – Series 1 (original 90s scale).

The set includes all the parts needed to build the full board, which must be assembled using glue (super glue or cyanoacrylate recommended).

📦 Included parts:

2 × 3×3 slot modules

2 × 3×3 slot modules with base

1 × 2×3 slot module

1 × 2×3 slot module with base

2 × logo plaque holder

2 × wall-mount brackets (screwable)

🧱 Each slot is sized to fit a single original MIMP figure.
🛠 All parts are meant to be glued together after printing to form the final board.

🔹 Note: The stickers shown in the photos are included as separate PDF files.
They were custom-made by me, using a recreated layout and fonts similar to the originals.
They are not official, and not designed to fit any original sticker set.
These files are provided for personal use only – no resale, no redistribution, no commercial use.
All copyright for the original Monster in My Pocket brand belongs to its respective owners.

🖨 Recommended print settings:

Material: PLA

Layer height: 0.2 mm

Infill: 10–20%

Bed size: 220×220 mm or larger

🎨 The display can be painted or left as-is. Clean, minimal look suitable for any collector.

Tagi