2010-2014 Ford Mustang VQL (Vent Quad lock)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Its a Quad lock that goes in the vent and can have more options to install things.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 18
- Makes
- 0
- Views
- 406
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
I thought it would be cool and neat idea to find and mix a bunch of models into one (since making models from scratch isn't really my specialty) to make a quad lock for the vent, especially since I personally wanted to mount my SCT X4 somewhere other than the windshield.
NOTE:
Tolerances are meant to be very tight so make sure your able to print out some very good prints. My settings I used are included in the pictures (May not work for your specific printer so you'll have to check on yours). I used the Elegoo Centauri Carbon.
Due to either the nature of it being 3d printer or just my lack of expertise. The more you lock and unlock the more lose the male quad lock will get. But you can just reprint it and it'll fit better again.
All the parts are oriented correctly so there's no need to rotate them.
Supports are required for majority of the parts (except the union nut).
FILAMENT:
PLA: Not Recommended
PETG: Works, but just be aware it may soften up a little if you live in a hot area.
ABS/ASA or better: Recommended