Counting matching models…
This is a toy, spring-loaded catapult, designed to be 3D-printed. catapult spring loaded print-in-place (+40m m range) - Makeronline - More Than Fun It features an intricate, lattice base and arm structures for lightweight, strong…
SCT 2"-24 threaded dust caps, male and female, for astronomy. These threaded dust caps are useful for astronomy telescopes and adapters. This thread size is used on smaller Schmidt-Cassegrain Telescopes (SCT) in the 5" - 10" sizes. It is…
Mount for the Hobbywing Max10 SCT within a Traxxas Rally/Slash with a LCG chassis. There's a cutout for the temp sensor as well as it's pretty close. You'll need one M3x8mm and M3x12mm for mounting. The ESC and switch should friction…
Fitting The mounting bracket for the Celestron 8" Edge HD is printed and tested for fitting. 6" SCT confirmed by Jason Soder 8" Edge HD confirmed by me 9,25" Edge HD confirmed by Andrew vk3bq 11" not tested 14" not tested If you confirm…
Simple to print Bahtinov mask für 8 Inch SC telescopes. Fits perfect on the Celestron EDGE HD Scope and has a middle guide ring for easier handling and optimal grip. I also added an .step file for better rounding performance when printing
ATTENTION: the switch holder V1 is designed to be used with hobbywing 3652 motor or similar size!! (max lenght 53mm!!) otherwise use V2 or V3 instead. a simple mount for the hobbywing ezrun esc. the sct/mt410 2.0 chassis offers a place to…
Two sets of wheels for the Tamiya Blitzer Beetle, but should also fit Stadium Blitzer and Stadium Thunder and mostly likely other 2WD Tamiya models which have ball-bearing front wheels rather than the 12mm hex found on most aftermarket…
A set of basic tube rings for the Celestron C5 that allow for mounting to a Vixen-Type Dovetail Bar. The Tube Rings have an internal diameter of 150mm. They should fit any instrument with that same diameter casing (not to be confused with…
2"-24 dual-sided threaded dust cap, male/female, for astronomy. These threaded dust caps are useful for astronomy telescopes and adapters. This thread size is used on smaller Schmidt-Cassegrain Telescopes (SCT) in the 5" - 10" sizes. It…
Needed a way to hold the Max Disctance retriever and was able to remix the model to hold the larger 52mm handle. Was just a quick and dirty slicer remix, but works great to hold the retriever.
Celestron 3.29"-16 threaded dust caps, male and female, for Celestron Schmidt-Cassegrain Telescopes (SCT). These threaded dust caps are useful for astronomy telescopes and adapters. This thread size is used on larger Celestron…
A basic dew sheild for the Celestron C5. I have made two versions, one is just a normal tube, the other has vanes the will produce diffraction spikes on bright stars. The sheild is slightly oversized because it's intended to have a 1-2mm…
Xiaomi Temperature and Humidity Sensor Holder by RSCtech You can use screw or glue to fix it. It keeps the sensor stable thanks to its design, even upside down. It can be easily removed when replacing the sensor battery.
This adapter converts a 2" female 24tpi thread commonly used on SCT telescopes to a T male threads adapter (42mm diameter by 0.75mm thread pitch) commonly used to attach cameras etc.. Instructions Suggest print at 0.1mm layer height.…
A small cable management attachment to tie cables to. This utilizes the screws where the fork normally connects to. The ribs are printed separately, and fit snuggly into the square pegs. I do recommend a small dab of super glue to prevent…
I made a 12" tri-bahtinov mask for my 12" meade. Works beautifully. I printed in glow in the dark filament. 25% infill 3 perimeters
This attaches to the pegboard using cleats so it can securely attach to the pegboard. Why? Well when I would remove some of my tools, the holder would come out with it. The video explains a lot of it. I was able to print this without…
Meade 3.25"-16 threaded dust caps, male and female, for large Meade Schmidt-Cassegrain Telescopes (SCT). These threaded dust caps are useful for astronomy telescopes and adapters. This thread size is used on large Meade Schmidt-Cassegrain…
Quick print to mount these SCT-013 by YHDC to din rails in a vertical position, which is the most space efficient. The back spring flexture gives just enough to clip onto the rail firmly. Print on its side with support material. If…
I designed and 3d printed a dewshield for my celestron 8 inch sct. Designed in Xdesign and printed with elegoo centauri carbon. It is the maximum print it can practically accomadate. The dewshield fits perfectly on the C8 sct, basically…
A mounting solution for the Hobbywing Max10 SCT in a Traxxas Stampede 4x4 with the stock chassis. This design has 3 parts; a base plate, a step (to keep things level) and then a holder that keeps the ESC and switch in place. 2 x M3 6mm…
The mask is slightly recessed to avoid touching the lens of the telescope. Handles are printed separately and should be glued to the mask.
This is a modded gearbox for the SandPiper 1:8 (by Black Crow) to fit a SCT Sidewinder. This motor is high KV (3800), so i run and 2S, with greater gear ratio, and smaller 95mm tires. With this configuration, this is drivable, the motor…
You will need various longer M3 screws, M3 washers, M3 Lock Nuts, M3 female thumb screws, body mount (LOSB2414), Rear 22T tower with body mounts cut off (TLR234093) and a lay down transmission assembly. There is also a battery strap mount…
Since I couldn't find anything on Ali when looking for a spare part, here is a replacement for the 12mm hex tire adapter (part number: 32746). I printed it in ABS, but it would probably also work in PETG or PLA. edit to your needs.
Requires 3x M6x35mm socket head screws to install as the original flat head screws are not long enough to go through the new brackets I printed in PETG for a bit more flexibility and more resistance to heat deformation in my car. Thanks…
This adapter has a 45mm 24tpi female thread (~1mm pitch) for screwing onto the rear of a Mak-Cass telescope, and converts to a 2" 24tpi male thread for attaching to 2" filters, field reducers etc. commonly used with Schmidt-Cassegrain…
I printed mine with TPU with four wall sides top and bottom at 80% gyroid infill. Stiffens up the entire nerf bar and will last forever.
designed some mudflaps for the Tekno SCT410 2.0 for an more scale look. you need: 6x m3x10mm screws 6x m3 nylock nuts 6x washer (optional) 2x mudflap mounts (preferred in petg or nylon) 2x mudflaps (preferred in tpu or cut a 2mm rubber…
Mount for the Castle Creations Sidewinder SCT within a Traxxas Rally/Slash with a LCG chassis. There a ziptie holder on the far end of the switch to hold the motor wires in place as well. You'll need one M3x8mm and M3x12mm cap head screw…
Mounting plate for Celestron SCT 9.25" (11") finder dovetail BOM 2x M4x20mm screw 2x M4 nuts Optional Aluminum Alloy Quick Release Plate Clamp for Tripod Monopod for Arca Swiss or Vixen style telescope clamp Note Use a M4 tap to create a…
This is a remix I made so that I could organize some of the cables that were too long and needed to be organized. This will add another working finder shoe that you could use to fasten more accesories. I use it to hold my pegasus powerbox…
The system is based on a double helical focuser like this: High Precision 1.25" Double Helical Focuser with Brass Compression Ring M42 T2 SCT Thread 2" Adapter for Astronomical Telescope…
I needed a mount for my MaxDisctance retriever on my Zuca Compact, but I didn't want to use the zip tie ones. Also, I wanted the brackets to have a more positive hold on the retriever. With this, just set the bottom into the bottom holder…
Tri-Bahtinov Mask for Meade LX85 ACF 8inch F10 SCT Category: 3D Printing
If you find my designs useful, please consider sending a tip The standard backet that comes with the ZWO EAF (Electronic Automatic Focuser) wouldnt line up with the mounting holes on my Astro Essentials SCT Crayford due to the large…
Unfortunately, there are no longer any spare parts for the A2016T and the bracket often breaks, so here is a cheap replacement. Part Number: 30286 There is a 2nd version if the shock tower with the holder for the body mount has broken…
Updated to: Use a smaller diameter main knob for more clearance from the diagonal on a C5. The new main knob is the same diameter as EleusisT's original. Use snap fit connectors to secure the reducers' support to the secured base plate.…
This is a holder for the Ellumiglow 8 inch circle EL Panel they sell targeting astrophotographers for taking flats. I'm using this on a Celestron C6 (6 inch SCT), which is why the opening is smaller than the panel. This was intentional to…
If you find my designs useful, please consider sending a tip Remix of jggall01 's Fine Focus Knob to fit the older Black Celestron SP-C8 tubes with the metal focus knobs and to give it that honeycomb effect everyone seems to be doing for…
Wall mount shelves for the Shark FlexStyle and all 7 attachments that come with the Costco bundle. The brackets print individually from the shelves for two main reasons. So you can choose which shelf is on top and which is on bottom So…
This is a simple remix from the star sense/ finder mount. I added a large plate, strong enough to hold a mini PC mounted on it. I used self adhesive velcro to fasten the PC to the plate. The plate is designed to fit a HEROBOX mini PC but…
The small arms are a bit weak and broke with PLA. In PETG it worked fine. Fusion file is included so feel free to remix it :)
Just a simple adjustment Are you looking for something you can't find? Message me what it is and I may be able to add it on here. If you would like to show support for what I am doing my paypal is [email protected] Free for personal…
Here are some parts which where created or modified. Body mount Holder for wheels or a wing (holes are not perfectly aligned but you can use a drill to get it working) Wing Motor mount (modified to get the right distance between spur and…
a holder for my online banking tan generator (old reiner-sct model provided by volksbank)
Fine focus tool for Celestron's SCT. Also work like dust cover cap for 1.25" eyepiece clamp.
THIS IS A CLEAN VERSION WITH NO WRITTING ON FLAPS. Printed in TPU 95 with 4 walls top and bottom 80% gyroid infill support on build plate only
Printed in ABS at 4 walls top and bottom, 40% cubic infill. Fits TIGHT on side guard, will need to short 2.4mm screws for install. Then use double back tape to secure your switch in place. WAY easier for a marshal to locate mid heat!
Cover for ReinerSCT Secoder 2 card reader, used for online banking.
Bahtinov Mask - Meade LX85 ACF 8inch F10 SCT Category: Hobby
37mm Mini SCT Wheel, 12 mm hex, RC Car wheel
Adapter for iAFS2 - iOptron 2" Inline Automatic Focuser to SCT 2″ thread (2″-24tpi) You can buy a commercial version from RAFCamera, well made from Aluminum but relatively cheap. Category: DIY
Holds all 7 flex style attachments that come in the Costco bundle. There are two versions: Locking Lugs, which engage with the slots on the attachments for a little more security No Locking Lugs, which just uses gravity and friction to…
One of my nylock nuts came loose somehow and I lost the spacers that come with the rear hub package ( part number TKR6576 ) . This replaces them and they fit like a glove. You will need two of each direction, so either use the 3mf file or…
Tri-Bahtinov Mask for Meade LX85 ACF 8inch F10 SCT Category: 3D Printing
Bahtinov Mask - Meade LX85 ACF 8inch F10 SCT Category: Hobby
Printed in TPU 95 with 4 walls top and bottom 80% gyroid infill support on build plate only
I printed mine with TPU with four wall sides top and bottom at 80% gyroid infill. Stiffens up the entire nerf bar and will last forever.
Printed in ABS at 4 walls top and bottom, 40% cubic infill. Fits TIGHT on side guard, will need to short 2.4mm screws for install. Then use double back tape to secure your switch in place. WAY easier for a marshal to locate mid heat!
THIS IS A CLEAN VERSION WITH NO WRITTING ON FLAPS. Printed in TPU 95 with 4 walls top and bottom 80% gyroid infill support on build plate only
I developed this adapter to thread onto the rear cell of my Celestron Nexstar 8SE SCT. The female part mates to the rear cell with a 2", 24TPI thread, and provides an M54x0.75mm male port, which I used to mount my ZWO ASI 2600MC Duo. The…
This design is a mount to place under the desk for this popular and inexpensive card reader — just apply double-sided tape.
THIS IS THE BEST LOOKING Organizer for Tree Society (retail ed.) board game THAT YOU CAN PRINT! 📢 Stay updated! Follow me on social media @ammedia3d for the latest news and new product releases ! 🚀 🎺 FEATURES 🎺 This is a 3D printable…
so i made a detailed instruction, but got timed out while editing and lost everything. here are the key features: with this thing you can convert your 1/24 losi micro sct to a trophy truck. you'll need 20+ m2 screws and nuts. and also…
Duplicate carrier for Losi 22S SCT RC Reciever. The one that comes with the car uses some tough double-stick tape to hold down the RX module. I figured it would just be easier to print a duplicate than to mess with the tape, plus it makes…
![Tree Society board game organizer by @ammedia3d [tabletop board game inserts sku: TREESCT001]](https://media.printables.com/media/prints/48068cee-06fc-4555-b534-e2b85dc51c78/images/10650894_cce10b41-360b-44a6-b2bb-7f68e28f33d9_29f61e2b-711d-4616-b065-6ba3eef13567/1.jpg)
