Märklin H0 modular Bridge Rail-C R1-30° Element (multi part) / Märklin H0 modulare Brücke Gleis-C Element R1 30° (mehrteilig)
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.71 – €0.87 net (excluding VAT)
For file: H0_Bruecke_Verbinder_v01_0.1mm_PLA_MK3S_1h7m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.79 excluding VAT (range midpoint).
- Weight reported by the author
- 3 g
- Print time reported by the author
- 1.12 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Curved rail element Rail-C R1 30° of Modular bridge system for H0 model railway. Good for temporary "carpet"-railways.
- Rating
- 5 / 5
- Likes
- 16
- Downloads
- 126
- Makes
- 0
- Views
- 471
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial
Motivation
When building a temporary model railway bridge or ramp, you need pillars with various sizes.
Using Lego for this purpose did not look too realistic.
For this reason I designed a pluggable model railway pillar system, that allows you to create any pillar height you need.
For a more realistic look of the bridge I designed a rail element for the curved Rail-C radius R1 30° rails.
This design allows a two colour design of the support element. By using a structured sheet metal for printing, you get a very realistic looking top surface for the paved side parts.
The elements fit on top of the modular Bridge pillar system and can be connected with snap-in-connectors.
The design leaves enough tolerance for the changing slopes needed for the bridge ramps.
The Märklin Rail-C system is intended to be used with for use with our design.
Printed with prusament PLA (Gentleman's Grey)
To build a complete ramp or bridge with ramps, you need quite a number of pillars and rail elements.
For one complete R1 curved rail support element (multi part) you need to print the following components:
1x H0_Bruecke_R1_30deg_Basis_v01.stl (base element)
(print orientation: upright)
(colour: Gentleman's Grey)
1x H0_Bruecke_R1_30deg_Abdeckung_innen_v01.stl (Paveway inner radius)
(print orientation: top face facing downwards, structured metal sheet)
(colour: Grey)
1x H0_Bruecke_R1_30deg_Abdeckung_aussen_v01.stl (Paveway outer radius)
(print orientation: top face facing downwards, structured metal sheet)
(colour: Grey)
2x H0_Bruecke_Verbinder_v01.stl (snap-in-connector)
(print orientation: left or right side)
(colour: Gentleman's Grey)
Assembly
[Rail Support Element R130 v02 complete]
The curved R1 rail support base element is printed as a single part.
Simply place the paveway-parts (inner+outer) in their related positions on the base element.
(the paveway parts have a different radius and do only fit in exactly their related position)
The snap-in-connectors go into the small openings (left+right) at the ends of the rail support element.
The connected rail support elements fit on top of the pillar system.
Play & Enjoy!!!