135 models
Railcar bogie, model 18-100. Used for most soviet/russian railcars from 1960s till now. Print instructions Three variants of crossbar included: without mounting hole, with one, and full variant with hole and sliders. Real bogie always…
Slim fitting 2-slot wide MLOK rail cover with a diamond textured grip pattern. Requires M5 MLOK mounting hardware with countersunk heads. This is the hardware I used:…
A plaque for the Orbital Railcannon Strike UPDATE 3/4/24: Added STL files UPDATE 3/5/2024: Added V2 files that includes some fixes for misc. symmetry and centering of objects, as well as updates to the stratagem model itself to be more…
The common railcleaner is too small, the cleaning lok is expensive, so I designed a cleaer for a kitchen sponge, cutted
Slim fitting 2-slot wide MLOK rail cover with a hexagonal textured grip pattern. Requires M5 MLOK mounting hardware with countersunk heads. This is the hardware I used:…
Automotorul CFPV. S-au fabricat 3 exemplare, la Astra Arad, inainte de al doilea razboi mondial, pentru o linie particulara de cale ferata din Romania. Si anume Caile Ferate Prahova Valeni (CFPV). Pentru utilizare comerciala sau va rog sa…
This was just a short and fun project I designed and built for my Dad. While the model is more or less a Ford Model T it is not exact and not to any particular scale. This model is about 150mm long and is designed to fit a track with 36mm…
The stl is used for the bed model in PrusaSlicer.and is installed int the Printer Settings tab, Bed Shape Model dialog. Load the stl .file Normally the stls are in the PrusaSlicer\resources\models. The Overlay or what Prusa calls Texture…
G-Scale 1:29 20 Axle Schnabel Railcar with Load Deck & Tank Load - I'm not very good at writing directions but everything should be self-explanatory on how it goes together! I used ¾" x 1 ½" white PVC water pipe to glue the two large…
The motor is Mabuchi 010. Also you need M2 screws with nuts. Un automotor pe care sa il poata tipari 3D toti pasionatii din Romania. Daca aveti planuri de la locomotive romanesti va rog sa mi le trimiteti la [email protected] pentru a…
Contoured 2-slot wide MLOK rail cover with a diamond textured grip pattern. Requires M5 MLOK mounting hardware with countersunk heads. This is the hardware I used:…
WWII German Armored railcar. Used to defend railroads from partisans. Intended for 1/100 scale gaming. This is my second attempt at creating a vehicle. I used it to learn Fusion360. Car is armed with six machine guns. It is self propelled…
This Core XY design is based on the Open Source RailCore II project ( https://RailCore.org ) with a number of modifications, including: 2020 Extrusions (1515 is standard) Aluminum Bottom Plate Billet corner bracing Billet X Carriages…
Parts for an EBT M3 railcar. I used wheels from a Kato C12, but you could use Kato 11-607, 11-608, or 11-609 wheels. Category: Hobby
WWII German Armored railcar. Used to defend railroads from partisans. Intended for 1/100 scale gaming. This is my first attempt at creating a vehicle. I used it to learn Fusion360. Many thanks to TigerAce1945 for allowing me to use his…
Dieseltriebwagen or diesel multiple unit for wooden railways compatible to BRIO, IKEA, etc. Required parts (per wagon): 3x M2x16mm (total 6x) 1x M2x10mm (total 2x) 1x Ø 6mm x 3mm magnet (total 2x) Building instructions Assemble 4 wheels…
Update 21Sep2023: I've updated the model with V3, after about a year or so I had a failure. V3 is vastly strengthened and should work for much longer. This is a mount for the Bondtech LGX with a mosquito attached for the Railcore. It is…
I've included a STEP file of the whole assembly for your reference For more info go to Smart Orbiter V3 Extruder: https://www.orbiterprojects.com/so3/ Euclid Probe: https://euclidprobe.github.io/ Cheers and happy printing! __Yves
The load is designed to nicely fit a open car with a 15x48mm loading surface. 3D PRINTING SETTINGS Layer height: 0.2mm Infill: 10% *07-02-2024: I reoriented the stl file in order to make sure it is imported with the right orrientation.
I designed a squash ball foot mod for the RailCore II 300ZL based on the original files. Note: Squash ball will feel a little tight when putting them into the feet, just squeeze and rotate. Amazon: 4 x Squash Balls used -…
I sold my 2003 VW T4 California Freestyle and I am cleaning up the designs I made over the years. This cover fits in the rails of the living area, to prevent hurting your toes when there is no carpet there. Unfortunately I don't have any…
Designed to use a Tomytec TM TR02 chassis or something similar. Category: Hobby
This is a door hinge for Railcore printers meant to prevent the door from swinging open or shut on its own. It uses a simple pin in track mechanism to lock the door open at 0, 90, and 180 degrees. To move the door between positions,…
RailCore® II 300 ZL/ZLT Railcore is a family of Core-XY based Reprap 3D printers designed by J. Steve White, Tony Akens, and Ben Withem. Build of Materials A BOM is provided with links to where you can source the parts and available…
The „easyRailClip“ is suitable for many different bags. The Adjuster can be moved along the clip to adjust it to the respective size . I used PLA for the parts. The Adjuster has 100% Infill.
This is my simple PanelDue 7i case for the Railcore II. The screen will be 0.5 mm recessed from the front but other then that everything should be flush with everything. The used M3x18 screws but any 3mmx18mm screws and hex bolts should…
LED diffuser assembly designed to attach to the 1515 extrusion of the Railcore II. The assembly is designed for 10mm wide LED light strips that can be cut in 100mm segments. Each assembly dovetails into another so that the diffuser…
Very short length minimalist rail-car rerailer that fits code 83 rail or larger. Designed to be portable/moveable but could be glued or rubber cemented into place if desired. Tested with Atlas code 83 track and was able to consistently…
HOn30 railbus designed to use a Tomytec TM TR02 chassis or similar. Few different versions. Category: Hobby
This is my current take on supporting the Railcore Y rail with a backer to reinforce the axis and reduce ghosting. Holes can and should be tapped for M3 hardware, simplifying installation and (theoretically) improving performance (a bit).…
There are two versions available a 19.00 mm and a 19.05mm bore. Try the 19.00mm bore first and if you're able to press the bearings in (they will be tight as this is likely an interference with how printers work) go with that if it is…
This remix of the RailCore BLTouch mount allows the BLTouch Y offset to be 36mm instead of 42mm from the nozzle of an E3D-v6. This will allow for a larger print volume in the Y direction. Print Settings Printer: Railcore 300ZL Rafts: No…
Ultrakill railcannon NOT MINE FROM ULTRAKILL
This is a remix of thing: https://www.thingiverse.com/thing:2700231 I found that the original did not leave enough clearance for the inset ptfe fitting that this covers on the top, as well as blocked the idler from fully closing. Please…
RailCore® Mini Railcore is a family of Core-XY based Reprap 3D printers designed by J. Steve White, Tony Akens, and Ben Withem. Build of Materials A BOM is provided with links to where you can source the parts and available aluminum…
My railcore has a halo with magnums on the top, and misumi corner brackets on the bottom. So mounting the x endstop on the top or bottom of the extrusion is a pain. This x endstop mounts on the same side as the linear rail. Hardware: Two…
Slim fitting 2-slot wide MLOK rail cover with a diamond textured grip pattern. Requires M5 MLOK mounting hardware with countersunk heads. This is the hardware I used:…
This is a remix of the Voron mount from Hartk123: https://github.com/hartk1213/MISC/tree/main/Voron%20Mods/Voron%202-Trident/2.4/Voron2.4_SexBolt_ZEndstop I used the hardware kit from KB3D:…
See LGX page for hardware details as it is the same. BL-Touch offsets are: dY = 23.39 dX = -7.13
Video Series Link: This is my entire Daedalus Upgrade project that I've been working on for the past 4-5 months. I've uploaded all of my files here for you to embark on this journey if you'd like or take parts of my build and make it into…
Railcore II Y carriage for Dual extrusion using the Bondtech BMG-X2 EXTRUDER and E3D Chimera. 2x GDStime Technology 24V 0.1A 40mm blowers for cooling. I use a Omron E2B-M12KN08-WP-C1 2M inductive probe with this. Slight updates and all is…
Mount for the LDO Orbiter v1.5 on the Railcore. Tested with the MRW native Mosquito mount. Two versions: Mount for the Orbiter only Mount for Orbiter with additional hardpoint for the 5015 Mosquito Duct Two M3 heated inserts required for…
Simple logo test print for the RailCore 300ZL. Print instructions Printer: RailCore II 300ZL Rafts: No Supports: No Resolution: 0.20mm Infill: 20% Filament: Inland PLA Gray
I am using this cowl, https://www.printables.com/model/851245-dragon-burner-bltouch3dtouch-cat-cowl-remix
These are additions I made to my Railcore II printer. Included is a cable management system, a Hemera toolboard.BLTouch mount and Duet Filamant Monitor mount. These are made to mount to the Mandela Rose Works Hemera Mount and Idlers. I…
Part to connect HGR15 Dustcovers to the ProverXL 4030 V2 Based on my Upgrade “PROVerXL 4030 V2 - Ultimate Linear Rail Upgrade” which can be found on wntr3d.etsy.com
This little thig is a fictional 0-4-4t Built from an old vertical boiler and coach to be used on the Bryn Bach Light Railway as an inspector's saloon in 1920. He was given the nickname Jim Bob after somebody chalked the name onto his coal…
Kato 11-109 version of Jim Bob
Here is everything I created for my Railcore build. There is the laser cut doors for both 300ZL and 300ZLT with a mount for the Duet PanelDue 5i. The side panels for 300ZL and 300ZLT with the cutouts for an Ultimaker Spool holder. Here is…
This is a major redesign of the XRAT (X Rail Alignment Tool) for the Railcore II. The basic principle is the same and the same operating instructions apply, but there are a number of improvements based on feedback from the community:…
This is a remix of the standard Railcore II foot edited to add height adjustability to compensate for uneven or bowed work surfaces. Use three standard Railcore II feet with this assembly in one corner, then set the height of the adjuster…
Railcore Bondtech BMG & Precision Piezo Orion Mount(s) This is a lengthy ReadMe that includes printing suggestions and required additional hardware. Additional components are listed at end, including required Piezo Mount. Update March 2…
Just a jig to align the rails in the center of the extrusion. This is redone to accomodate the extra thickness of the optional aluminum halo top. I recommend printing it in PLA, just because it's stiffer than PETG. Print Settings…
The BentoBox is a fine air cleaner using both carbon and HEPA filters with fan-powered air movement. The RailCore printers (and perhaps others) use 1515 extrusion as framing material, and I wanted the BentoBox stack to fit more tightly…
Railcore II Aluminum Y Carriage Belt Retainer Rebuild/Remix of the Aluminum Y-Carriage Belt Retainer for the Railcore II. Changes include: Includes a Support Blocker stl - supports are not required inside the tension bolt tube and I found…
Stabiler Clip zur Befestigung von Lichterketten, Girlanden und anderer Deko an runden Balkongeländern – ohne Kabelbinder, Schrauben, oder Kleben. Ich habe meine Weihnachtsdeko damit befestigt, da ich keine Lust mehr hatte, mit…
Simple adapter for a hand clamp for attaching a trailcam.
Railcore II E3D v6 Threaded Heatsink Precision Piezo Bottom Mount Bottom mount for the Precision Piezo Orion z-probe and E3D v6 with the Threaded Heat Sink. Part of the Emma Puggle Railcore II component set. Part of the Emma Puggle…
Railcore II Drag Chain Utilizes 20mmx10mm drag chain to clean up cabling. Uses approximately 25 chain links. The Motor Side attaches to rear of your extruder motor. I added some thin (2mm) cork between the motor and part to give a bit of…
Based on the euclid railcore corner mount . This removes a bit of material from the corner mount so that the mount can be pushed higher. You probably don't want the exact model here, instead duplicate the onshape file and change the value…
Here is a early design for the Railcore using the LGX extruder with the Mosquito hotend and Euclid probe. The .step file has been uploaded, so feel free to modify it as needed. My guess is that the euclid probe mount area will need to be…
Railcore II Bondtech BMG & Precision Piezo Orion Mount Mount to allow use of the Precision Piezo Orion z-probe and BMG Extruder on the Railcore II with the ultralight Aluminum Y-Carriage. For a printed parts only version see my thing at…
This is a remix of the Lumberjack Engineering design found here . Same issue apply re: clones / off-brands. I have the MRW cover and related cover interface components installed on my 300ZLT which pretty much renders all of the 1515 rail…
Here is a simple set of Z axis calibration tools. Use the step(or gauge block) to set either 25 or 30mm base resting height of the Z axis rails when loose. Center the rails to the extrusion with the block and tighten. Attach the yokes to…
Wanting to make use of the Mosquito Hotend's ability to do single-hand nozzle changes, I decided to print a hard mount to adapt my railcore from the groovemount adapter that comes with the kits. I originally chose the SE-designed adapter,…
When I decided to reprint the RailCore Electronic Box corners in a different color, I figured in true RailCore spirit, I'd just redesign everything. The corners do not require screws to hold in the sides as they just slide in and include…
I like the Prusa articulated camera mount but none of the options mounted very well to the 1515 profile and Halo on my railcore. Print Settings Printer: Railcore 300ZL Rafts: No Supports: No Resolution: 0.32mm Infill: 20% Filament: Atomic…
I don't have these doors, but a user on the Railcore discord noted that the Printed Solid doors have a 19mm opening to use as a finger pull. These knobs are designed to go through the finger hole and thread on with the printed nut. Print…
This is a prototype, fyi. I've printed it but have not tested it yet. The Pinda probe install into the mount is very tight but is manageable. The use of a heat set insert in the pinda probe mount with an M3 screw will secure the probe…
This is a mount to attach the Lumberjack Engineering PanelDue (5i or 7i) case to the top front corner of the RailCore II series electronics box. Link to the case model: https://www.thingiverse.com/thing:2799628
Railcore Y-Rail Alignment Tool (Y-RAT). Will work with or without halo. Use these tools together with clamps while tensioning your belts to make sure your Y-rail stays parallel to your right 1515 extrusion. There are tabs at the bottom of…
This is the https://www.thingiverse.com/thing:3542340 modified for heatset inserts. It's for WAGO 222s (old style). If you have the new style WAGOs (221s) print this one: https://www.thingiverse.com/thing:3914814 Initeq (Amazon) inserts…
I wanted to retain the functional of the Filastruder Railcore cable clip, but I was putting interfaces for the enclosure on the top of the printer so I wanted a clip that side mounted. Print Settings Printer: Railcore II ZL 300 Rafts: No…
This is a more rigid two part foot that ties a long m3 machine screw into the extrusion end as well as interfacing with the 1515 extrusion on both sides. This requires ultrasert II heat set inserts, I get mine from Filastruder. Others may…
This is a Door Handle for a Railcore II 300ZLT using a large single door. I wanted a simple magnet/latch solution for the door. Using the parts I had laying around I came up with this solution. Parts needed: 3 - M3x12mm Socket cap screws,…
A simple hanger designed to store flex plates on the side of the printer when not in use. There are two variants: one with through holes sized for the 5.3x51.mm BOM heated inserts and another for McMaster P/N: 94459A130 4.7x4.3mm inserts.…
NOTE: This thing has been semi-superseded by the XRAT 2.0 . The old design still works fine, but if you're working on a new build, I would suggest considering the 2.0. That said, it is a slightly harder print and does require additional…
You will need: Any 19mm diameter emergency stop latching button. The one pictured works great and can be found here: https://smile.amazon.com/gp/product/B07FRYD9WK/ SPDT power relay: https://smile.amazon.com/gp/product/B07587NZTC small…
More compact E3D Hemera mount for the Railcore. EBM-PAPST RLF35-8/14N 5cm blower and Omron E2B-M12KN08-WP-C1 2M probe. You have to turn around the Y-Rail to get 30x30 cm xy Support only around the opening for the blower. New blower shroud…
This is a simple extruder and filament sensor holder for the anycubic mega printer. It'll fit the sides of the frame snugly and won't slide up or down by itself meanwhile not interfering with the Z axis carriage. This design is…
This is a taller Z alignment tool for the Railcore ZLT when the yokes are turned over although it will work with the standard ZLT. Because the ZL does not have bearing holders, it is not required. The model is intended to print large side…
When attaching NEMA23 stepper motors with damper to my Railcore® II ZLT, I found that the shaft of the rear stepper just barely fit into the pulley. I created this riser to fit between the top extrusion and stepper mount, raising the…
This pack contains my customized Flex3D mount for Railcore II. It contains: -G5 base with integrated mounting bracket Allows lightening up the gantry, lower the filament path to an absolute minimum, and gain over 10mm in Z travel. Also…
Print at least two latches and one door pull. Set latches at desired location, mark, and drill with 3mm drill bit. Superglue magnets to door pull. Once dried, attach second magnet(s) to each mag latch, apply superglue, and press into frame.
40mm fan shroud for E3D v6 for use with a Railcore II printer. This design also integrates the e3d groove mount clip, so that the fan shroud is holding both the heatsink and the fan in place. The advantage of this design is to make the…
Railcore II Part Cooling Fan Support Bracket Small accessory bracket to add some support to your part cooling fan which has the possibility to droop over time. Requires attachment point on belt retainer. Tested compatibility with my…
From the LEGO 42129 4x4 Mercedes-Benz Zetros Trial Truck set, timtimgo created an alternative build, which is a fantastic MOC (downloadable here: https://rebrickable.com/mocs/MOC-88360 ). It’s a great design, but its weakness lies in the…
This is a replacement X-stop mount for the Railcore 2 printers. The original mount puts the stop switch actuator almost exactly inline with the hole in the Aluminum X Carraige (not sure on the printed one). Any skew at all to the mount…
Mount for the BL-Touch to the standard Railcore 2 y-carriage. Print solid in PETG or PLA. The model includes a print-in-place support for the captured nut blocks. You will have to drill them out after you print it. The support is 0.2mm…
Belt tuner for the Railcore. Slide the lever behind the X or Y motor at the very top of the stepper body as pictured, then use an M3 bolt to secure the lever to the bracket. Gradually tighten until the Y rail is perfectly parallel to the…
Remixed/redrew the original mount to fit inside the aperture on the aluminium mounts that come with the Filastruder Railcore kits. Print Settings Printer: Railcore 2 300 ZL Rafts: No Supports: Doesn't Matter Resolution: 0.32mm Infill: 18%…
Just a mount for a Wyze camera. Can be mounted from the front as shown with metal plate glued in or on top of the side extrusions without metal plate inside. Prints without support. Changed the mount so that it is flush with the front…
Modified jstevewhite's cover interface for railcore to allow the use of a PC4-M10 push-fitting on the inside of the printer so filament could be fed from the outside. Print Settings Printer: Railcore 300ZLT Rafts: No Supports: Doesn't…
This is a magnetic latch for a railcore. It uses 4 qty - 1/2" (12.7mm) X .063" (1.6mm) magnets from Home Depot encased in plastic covers to minimize the magnetic force. The stationary part holds 2 magnets and then screws down into the…
This spool holder is a remix of a remix of a remix :) Its for the Railcore II printer. It requires a short length of M6x100 threaded rod and 4 M6x100 nuts. Use two nuts to secure the rod into the spool arm (alternatively you can thread in…
Print with no top/bottom and honeycomb infill for a nice look.
NOTE: The STL scale is 10x normal so scale in your slicer to 10%. Sorry I can't fix this easily as I lost my f360 timeline, but super easy for you to compensate on your end. For those of us who just can't quite get the Railcore perfectly…
Redesigned to work better with US 0.25 inch thick side panels. Category: 3D Printer Accessories
