V2 Gearbox Trigger STEP
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Airsoft trigger for the Specna Arms SA-H23 or other V2 AEG gearbox and HPA / Polarstar trigger board. Pin needed.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 55
- Makes
- 0
- Views
- 223
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Public Domain
Airsoft trigger for the Specna Arms SA-H23 or other V2 AEG gear box for use with a Polarstar Jack or other HPA trigger boards.
Requires a 3mm pin 12-14mm in length, there is also a 1/8" version requiring a ½" inch in length.
Recommend printing both version to see which fits your available pin, 3mm may require enlarging due to print tolerances. A 3mm set screw may work in replacement of a pin, a 3mm SHCS interferes with the selector plate (semi auto only, no safe).
Print settings : 0.4nozzle @ 150um with PETG @ 30% infill. 4 perimeters, base supports, brim.
Print time: ~12 minutes + heat-up