Contour Gauge Mini
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.14 – €1.39 net (excluding VAT)
For file: Tray3_PETG_2 Part_Case _M3_Spring_Lever_0.4n_0.2mm_PETG_COREONE_1h5m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.26 excluding VAT (range midpoint).
- Weight reported by the author
- 21 g
- Print time reported by the author
- 1.08 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Smaller gauge with finer teeth for a bit more detail. Prints PLA some parts need PETG.
- Rating
- 5 / 5
- Likes
- 37
- Downloads
- 120
- Makes
- 1
- Views
- 594
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Blades printed at 0.2mm layer, 4mm nozzle, 2 walls, with 100% infill. Print 42.
If your prints are accurate they should all fit together without much friction. If you have slight over extrusion, either sand them down or try removing one of the blades.
The case top and bottom are in the same file.
I printed at 0.2mm layer, 4mm nozzle with 3 walls. 2 walls would work. It requires 5 x M3 16mm button heads and 5x M3 nuts.
I used some painters tape inside the case to add some lateral friction to the blades sliding in and out.
Print Spring and Lever (See Below)
All credit to Tjaf this is a minor change to a great model. Please see Tjaf's model page to get more detailed info. see the original design and to pick up the Spring and lever for completion to this remix. I recommend the 2mm Lever. Print both in petg, to reduce wear and have a little flex without breaking.
https://www.printables.com/model/57209-lockable-contour-gauge
