1 / 3
TLR 22X-4 - Battery Strap
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A replacement strap intended to be used with the non-Elite kit battery tray.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 4
- Makes
- 0
- Views
- 45
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Public Domain
This is a simple replacement battery strap for the non-Elite version of the TLR 22X-4 kit. It is intended to be printed out of TPU. The print settings are very important so that it stretches like the OEM rubber strap.
Print settings:
- 1 Wall
- 2 Top Layers
- 1 Bottom Layer
- 15% Gyroid infill (Gyroid is key here)
- Make sure the line direction is 45 degrees for the best strength and flexibility
Print flat. It should come out very stretchy. If it's too stretchy with your brand of TPU, you can try another wall, but it will make a dramatic difference. More infill is what I would recommend first.