1 / 2
Coffee Machine Steam Wand replacement insulating boot
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement for the worn rubber insulating boot from espresso machine steam wand 10mm (3/8") diameter
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 27
- Makes
- 2
- Views
- 345
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Public Domain
Replacement insulating boot for a 10mm (3/8") diameter steam wand.
Filament: TPU 98A shore hardness
Layer height: 0.2mm
Infill: 100%
NO SUPPORTS REQUIRED
Note: if the ferrule on the end of the steam wand restricts the boot from pushing on, remove if possible. Otherwise place boot in boiling water for a very short time and this will make it somewhat easier to push over any small ridge
I have used this now for 3 weeks every day. Yes, I drink a lot of coffee. This upgrade hasn't softened and is still fully functional