1 / 6
Mounting brackets for Oimaster 6bay 2.5in HDD enclosure into Silverstone Milo ML05 Mini ITX case. — image 1
1 / 6

Mounting brackets for Oimaster 6bay 2.5in HDD enclosure into Silverstone Milo ML05 Mini ITX case.

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A base plate and side brackets to mount the Oimaster 6 bay HDD enclosure inside a Silverstone Milo ML05 case. + bonus

Rating
0 / 5
Likes
4
Downloads
19
Makes
0
Views
651
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial — Share Alike

A friend needed to mount an Oimaster 6 bay 2.5in SATA SSD HHD enclosure into a Silverstone Milo ML05 mono ITX case. The drives are accessed via the rear opening of the ITX case.  I designed a baseplate to fit over 4 of the ITX mounting posts, its secured by three motherboard style screws with the fourth obscured by the drive enclosure. You'll need to print 2 of the side brackets and attach them to the  drive enclosure before slotting the unit down onto the base plate, again motherboard style screws (4) are screwed into the plastic of the base plate. The face plate presses onto protruding edges at the rear of the Silverstone case, they're tight so as not to need further fixing. Enjoy!

Bonus: Added a small box to house a 24/20Pin DC Power Adapter Board Module for ATX DC Power Supply Breakout Board

Tags