Mounting brackets for Oimaster 6bay 2.5in HDD enclosure into Silverstone Milo ML05 Mini ITX case.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A base plate and side brackets to mount the Oimaster 6 bay HDD enclosure inside a Silverstone Milo ML05 case. + bonus
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 651
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A friend needed to mount an Oimaster 6 bay 2.5in SATA SSD HHD enclosure into a Silverstone Milo ML05 mono ITX case. The drives are accessed via the rear opening of the ITX case. I designed a baseplate to fit over 4 of the ITX mounting posts, its secured by three motherboard style screws with the fourth obscured by the drive enclosure. You'll need to print 2 of the side brackets and attach them to the drive enclosure before slotting the unit down onto the base plate, again motherboard style screws (4) are screwed into the plastic of the base plate. The face plate presses onto protruding edges at the rear of the Silverstone case, they're tight so as not to need further fixing. Enjoy!
Bonus: Added a small box to house a 24/20Pin DC Power Adapter Board Module for ATX DC Power Supply Breakout Board