1 / 7
Woodgrain NixieShop Clock Enclosures — image 1
1 / 7

Woodgrain NixieShop Clock Enclosures

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

An inclined enclosure for the NixieShop clock PCB that tilts the clock up at 10º. Perfect for desktop display.

Rating
0 / 5
Likes
2
Downloads
7
Makes
0
Views
144
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

As pretty as the wood cases are for the nixie tube clocks at nixieshop.com, I knew I wanted one with some tilt, so I can see it at my desk without the numbers being obscured by the grids in the tubes. I also wanted it to be as compact as possible. 

This simple case fits my needs. The PCB slides in from the bottom and is secured with four 4-6mm M3 socket cap screws. A small clip holds the PCB in place and prevents it from flexing when you press the button/knob. 

I am showing off the z753m nixie tubes, but other tubes should fit the case as well. 

Tip: if your board gets stuck because it's at an odd angle, don't push the tubes. Instead pull the brass standoffs from the bottom with pliers or longer M3 screws.

 

For a wood grain finish I followed the method featured here by PandaN: https://hackaday.com/2025/06/03/add-wood-grain-texture-to-3d-prints-with-a-model-of-a-log 

A prepared .3mf file is included for reference, as well as the Fusion360 file for modification. 

Tags