Linear Bearing Cleaner (LM8UU)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tool for perfect cleaning of LM8UU linear bearings
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 10
- Makes
- 0
- Views
- 123
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
Among the regular maintenance tasks for a printer is the lubrication of its linear bearings. However, before applying new lubricant, the bearings should be thoroughly cleaned. This will remove old grease and any potential contaminants.
Linear Bearing Cleaning Procedure:
- Check the cleaner's cleanliness.
- Insert the bearing into the cleaner.
- Pour cleaning fluid (IPA) inside.
- Screw on the cap and lightly tighten it so that the bearing isn't loose.
- Shake several times.
- Unscrew the cap.
- Pour out the contaminated fluid.
- Clean the cleaner.
- Repeat the entire procedure if necessary.
- Allow the cleaned bearing to dry thoroughly from the cleaning fluid.
- Apply the appropriate lubricant to the bearing
Print instructions:
- Material: PETG
- Layer: 0,15 mm
- Perimeters: 4-5
- Infill: 15%
- Supports: No
- Brim: Optionally
This model requires some special settings, more details in the attached 3MF file.
Custom modification:
If you want to modify the model, I am attaching the STEP file and a link to my OnShape.
You can easily modify the model by changing the variables.
Current model version:
V01
Note:
Please don’t forget to leave a comment and rating. I truly appreciate any feedback – it helps me improve and address any potential shortcomings in the model. Thank you very much!
Print visions, create reality!