Space Pi filament guide/connector
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Filament Guide for Creality Space Pi with PC4-M10 coupler
- Rating
- 4 / 5
- Likes
- 17
- Downloads
- 94
- Makes
- 2
- Views
- 733
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I printed a lot of similar filament guides for my Space Pi drybox, but had issues with all of them. Some were impossible to assemble, others required supports to print properly, and some still needed multiple attempts to feed the filament through. I fixed all of these issues with my model.
Design Features:
All threads are pre-formed and easy to install
Guide funnel is wide and directs filament into the connector without getting stuck
Grooves in the guide fit in the Space Pi case and help with alignment and installation
Prints fast and without supports
There also should be enough space to use the popular desiccant box for the Space Pi.
Required Parts:
1x PC4-M10 connector
Printing Notes:
Print with fine enough layer height so the threads print properly.
I did 0.15mmUse a heat resistant material that don't deforms under the heat of the dryer.
I used Prusament ASASupports are not required