Sovol Zero PTFE and Umbilical Cable Connector Clip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple connector clip to attach the Sovol Zero toolhead umbilical cable to the PTFE tube.
- Rating
- 5 / 5
- Likes
- 32
- Downloads
- 198
- Makes
- 1
- Views
- 446
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
The Sovol Zero toolhead's umbilical cable doesn't hold its shape terribly well, and can sag or get pushed into things around the chamber (and cause a pretty bad day in some cases). This is a simple connector clip to attach the PTFE tube to the umbilical cable, giving it considerable additional stiffness and keeping it away from anything that might snag it.
The larger side with the prongs facing out is meant to slip around the umbilical cable, and the shorter, smaller side clips snugly onto the PTFE tube. I use two of these, one connected fairly close to the toolhead, and another at the bend before the cable and tube go their separate ways.
Print using a filament appropriate for your chamber temperatures.