Miele Triflex HX1 Floorhead Roller Brush End Door / Hatch Cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 3D‑printable replacement end door (hatch cover) for the roller brush assembly of the Miele Triflex HX1 floorhead.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 11
- Makes
- 0
- Views
- 329
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
Extra note: If you have any tips / comments. Please let me know!
Overview
This part is the little access door at the end of the motorized floorhead on the Miele Triflex HX1 vacuum cleaner. It clips on to hold the roller brush in place and swings open so you can remove the brush roll for cleaning or replacement. If your original plastic door has broken or cracked, this 3D‑printed version is an exact fit and restores full functionality.
This is a replica for the OEM Miele Triflex HX1 floorhead
Printing Guidelines (My print)
- Material: PLA (the only thing I have)
- Layer height: 0.2 mm
- Infill: 100% for extra stability
- Supports: Not needed
Installation
- Take the Miele HX1 Floorhead
- Remove the screws
- Take the cover off
- Clean if needed
- Pinch the connector and pull the door out
- Install new door by putting it in
- Close it back up
