A1 Nozzle Brush mount for E3NG

Advisory:

This model has a tendency to snap. If it does snap, do not try to glue it together. That will only make it worse!

Details:
So I saw the A1 Nozzle Brush for the right on the RH3D Discord but it would not work for the right so I moved it to the left. This replaces the Strain Relief on the left with nozzle wiper and a longer, extended strain relief.

Note: 
It is a bit tight so it may not go in all the way.


How to Print:
Print with supports on and blockers in the images as mentioned. Verify before you print, if support is in the middle, you wont be able to remove it.

 

Klipper Configuration (Made for my printer!)
[gcode_macro CLEAN_NOZZLE]
gcode:
   G90                             
   G1 Z7                           
   G1 X17 Y240 
   {% for i in range(15) %}
   G1 X46 Y240 Z-0
   G1 X46 Y237 Z-0               
   G1 X17 Y237 Z-0               
   {% endfor %}
   G1 X17 Y240 Z8

[gcode_macro CLEAN_NOZZLE_VERIFY]
description: just to verify :0
gcode:
   G90                            
   G1 F9000  
   G1 Z7                    
   G1 X10.5 Y243.5  
   G1 Z1.470                      
   {% for i in range(7) %}
   G1 X50.5 Y243.5 Z1.470
   G1 X50.5 Y233.5 Z1.470 
   G1 X10.5 Y233.5 Z1.470 
   {% endfor %}
[gcode_macro CLEAN_NOZZLE] gcode: G90 G1 Z7 G1 X17 Y240 {% for i in range(15) %} G1 X46 Y240 Z-0 G1 X46 Y237 Z-0 G1 X17 Y237 Z-0 {% endfor %} G1 X17 Y240 Z8 [gcode_macro CLEAN_NOZZLE_VERIFY] description: just to verify :0 gcode: G90 G1 F9000 G1 Z7 G1 X10.5 Y243.5 G1 Z1.470 {% for i in range(7) %} G1 X50.5 Y243.5 Z1.470 G1 X50.5 Y233.5 Z1.470 G1 X10.5 Y233.5 Z1.470 {% endfor %}

Updates:

Update v1.0.1:

• Added Gcode commands made for use with klipper