Ender 3 Pro Utility Drawer (Remix of Ember's Design)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a simple drawer for the Creality Ender 3 Pro
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 12
- Makes
- 1
- Views
- 154
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- GNU General Public License v2.0
This drawer is for the purpose of storing small tools and parts that would otherwise clutter the table, bench, or desk the machine resides on. See Ember's original design for more details on the models installation and use: https://www.printables.com/model/722882-ender-3-pro-utility-drawer
I print both pieces as oriented in the STL's with supports “Touching Buildplate”. The drawer pull on the face of the drawer will obviously need supports. The 15mm throughway on the backside of the housing may bridge properly on some machines, but I used supports anyways to ensure it printed cleanly. Both support pieces removed quite easily for me without any special considerations.
Installation of this model is simple. Remove the two screws on the right side 40x40mm extrusion holding the stock display, or in my case, the power on/off switch, and the four screws holding the belt tensioner to the center extrusion. Slide the drawer housing into the two v-slot grooves on the right side 40x40mm extrusion and the lower v-slot opening on the center extrusion. Slide it fully into that opening until it stops at the connecting extrusion that runs left and right. Reinstall the Y axis belt tensioner and display, or in my case, the power on/off switch, retension the Y axis belt, slide the drawer into the housing, and done!
UPDATE 08152025: I added a version 2 of the drawer housing. The version 2 housing eliminates the depression at the top and reduces material used for printing, subsequently, the version 2 housing should print quicker. I preferred the look and feel of the drawer housing I made for the Sunlu T3, so I remodeled this one to better match the form factor of that design.