1 / 1
Rock Climbing Crimp/Chip/Foothold - Screw On
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple Printable hold for your wall, modelled off the holds found on a Kilter Board at a local Gym Use with Woodscrews.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 44
- Makes
- 0
- Views
- 122
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Share Alike
Simple Chip for your climbing wall.
Uses two woodscrews to attach to a board, suitable sizes are from 3.5-5mm, or #6-#10, and I would recommend a minimum of 20mm or ¾ Long.
Print with 4+ walls, tested in PLA at 0.2mm Layer height, 15% infill.