Wall Cable Pass-Through Plate (100x100mm, Split Design, Screw Mount)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Two-piece 100x100mm wall cable pass-through plate for easy cable
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 16
- Makes
- 0
- Views
- 125
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a 100x100mm wall cable pass-through plate designed to neatly route and protect multiple cables (Ethernet, power, HDMI, etc.) coming through a wall or conduit. Ideal for clean home or office installations.
Made of two separate pieces, so you don’t need to disconnect existing cables like with traditional one-piece plates
Overall dimensions: 100mm x 100mm
4 screw holes: 5mm diameter, placed 5mm from each corner
Semicircular cable opening with notched center seam for flexible routing
Designed for #4 screws (approx. 3.5mm diameter) for wood or drywall
Snap-fit center, or secure with screws for extra strength
Compatible with PLA, PETG, or ABS
To save material, print the front side facing down on the print bed. This reduces supports and improves finish on the visible surface.
Includes:
STL files for both halves of the front plate
Optional rear plate or support (not always necessary)
Printing Tips:
Print flat on bed
0.2mm layer height recommended
Use 3+ perimeters for extra strength