HueForge Zoro
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
HueForge of the king of hell Zoro
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 16
- Makes
- 0
- Views
- 100
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Project: zoro_v1.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 126.01x225mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PETG BambuLab Basic White Transmission Distance: 4.8
PETG GEEETECH BLACK Transmission Distance: 0.5
PETG Sunlu Red Transmission Distance: 11
PETG GEEETECH GREEN Transmission Distance: 9
This print uses 4 unique filaments
Swap Instructions:
Start with White
At layer #6 (0.56mm) swap to BLACK
At layer #9 (0.8mm) swap to Red
At layer #17 (1.44mm) swap to GREEN for the rest.
the warning of the floating regions can be ignored
The model can be scaled, but the height (z) needs to stay the same