Counting matching models…
Simple, single 12 gague shotshell holder to give sporting shooters that one last round to complete a stage (when you miss that last critical shot - we've all done it!). This is a remix based on glompos21 design on Thingiverse. I've…
Print approx. €0.86–€1.05 excl. taxPreliminary estimate for PETGSource material: PET
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint The Hellboy series made its first appearance as a four-page, black and white comic by Mike…
Print approx. €8.16–€9.97 excl. taxPreliminary estimate for one variant
Hello! I designed this tag based off the infamous “hello my name is” sticker. I designed this so that you can write/paint your pets name on the tag so that it can have a more unique and genuine appearance. Print method: Printed at 0.2mm.…
Print approx. €0.64–€0.78 excl. taxPreliminary estimate for one variant
My mini version of Hellboy.
Print approx. €2.88–€3.52 excl. taxPreliminary estimate for one variant
Super Hello Kitty
Print approx. €4.68–€5.72 excl. taxPreliminary estimate for one variant
Recomiendo imprimir con boquilla 0,6 y cuatro perímetros
Print approx. €2.51–€3.07 excl. taxPreliminary estimate for one variant
File available here https://www.myminifactory.com/object/3d-print-hellboy-badge-94674 If you like this model check my other stuff, check out my www.patreon.com/wekster or my youtube channel www.youtube.com/wekster
Print approx. €2.78–€3.40 excl. taxPreliminary estimate for one variant
This is a Hello My Name Is , name tag that just happens to be awesome! : ) Makes a funny wall hanging or fridge magnet. Color changes are at layer 14 and 20 in the gcode file. Please post your makes. I would love to see them! Thanks and…
Print approx. €2.32–€2.83 excl. taxPreliminary estimate for one variant
It's Helmo! No MMU needed, I did color changes at different layers. If following the parameters below, the color changes should be at the listed layer height. Color order: Black Orange @1mm, layer 5 Yellow @2.2mm, layer 11 Red @3mm, layer…
Print approx. €5.57–€6.81 excl. taxPreliminary estimate for one variant
11/24/25 Update - Added 2.75 inch high brass, 2.75 inch low brass and 3 inch high brass iterations. The 2.75 low brass even has an 8 petal crimp. I was doing some mid-season organization of shotshells in my ammunition cabinet, and started…
Print approx. €0.66–€0.81 excl. taxPreliminary estimate for one variant
A handheld tamping tool used to manually seat a wad in a shotshell hull during hand loading. Also useful to tamp down layers of tight-fitting buckshot within the wad/hull. The Shotshell Wad Ram is a two-part design with a threaded handle…
Print approx. €0.57–€0.69 excl. taxPreliminary estimate for one variant
This eggshell candy dish is the perfect home décor accent to show off your candy. The top is removeable and allows candy to be placed in both halves of the shell and the base. Also includes 3D printable grass (not shown) if you want to…
Print approx. €4.01–€4.90 excl. taxPreliminary estimate for one variant
Original model height is 81 mm. I printed one original size and also one scaled up by 35% (110 mm height). See quail for size.
Print approx. €5.00–€6.11 excl. taxPreliminary estimate for one variant
Esta pieza evita que el cable del Hotend pivotee sobre el cuello de la ficha RJ y a la vez lo mantiene a un lado del gatillo del extrusor mejorando el uso y la duración del mismo ya que sirve de base para apoyar el dedo al accionarlo. No…
Print approx. €0.63–€0.78 excl. taxPreliminary estimate for one variant
Since all of the feet I could find were for the dGPU version I quickly modeled one for iGPU, because I couldn't get proper airflow when using on bed. Now it works perfect.
Print approx. €0.30–€0.36 excl. taxPreliminary estimate for one variant
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Basico Control3D Black PLA Sunlu Meta Grey PLA Basico Control3D Orange PLA+ Esun Bone White Swap Instructions: Start with Black At layer…
Print approx. €2.84–€3.47 excl. taxPreliminary estimate for one variant
A simple screw and bitholder you can attach to a Einhell screwdriver using a M4*20mm screw. You have to pause the print at a certain layerheight and put 3-4 Neodym 10*3mm Magnets in.
Print approx. €0.96–€1.17 excl. taxPreliminary estimate for one variant
The 12 gauge shells I modeled seemed to be just about the right size for a neat little stash container, so I modified the 2.75 inch regular brass version, hollowing it out and threading the hull and brass case pieces. I printed mine using…
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for one variant
When in the middle of a project I needed a simple case to cover components and protect them from curious cats. There is a little extra room on one side in order to allow for it to slide over the attachment points. The stl uploaded is…
Print approx. €2.43–€2.97 excl. taxPreliminary estimate for one variant
This is a shell-mounted holder for the GBFans Cyclotron lights in the GBFans Pack Light Kit. This is designed for the Q-Pack MK3 ( https://github.com/mr-kiou/q-pack ). Assembly is straight-forward: Insert lens into bottom of base Insert…
Print approx. €1.43–€1.75 excl. taxPreliminary estimate for PETGSource material: PET
This is a 3D scan I made of a King Helmet shell that I salvaged from the refuse discarded by an octopus in the entrance to its lair. While I was SCUBA diving in the Caribbean, I came across an octopus den. After watching it awhile, I…
Print approx. €1.03–€1.26 excl. taxPreliminary estimate for one variant
An egg holder with an integrated eggshell basket so you have a place to put them.
Print approx. €1.44–€1.76 excl. taxPreliminary estimate for PETGSource material: PET
A Cracked Eggshell Decorative Holder crafted as a 3D printable product designed for those who appreciate the delicate beauty of nature. The holder consists of two parts: the base and the cover. The cover, inspired by the organic form of a…
Print approx. €2.80–€3.42 excl. taxPreliminary estimate for one variant
Hello, Today I have for you the Character Hell boy, devil, Satan . It is suitable for children to color and it is either Hellboy from the movie of the same name, or maybe the devil, or maybe the devil. I used PLA/PETG as the material. No…
Print approx. €7.72–€9.44 excl. taxPreliminary estimate for one variant
Nautilus shell chalice : Wunderkammer Historical Context & Details The Original Piece: Created around 1550–1580 , it is a masterpiece of "globalization" in the Renaissance. The shell itself was harvested in the South China Sea and…
Print approx. €12.57–€15.36 excl. taxPreliminary estimate for one variant
A 1:12 and 1:48 scale Helldiver miniature! This model is 1 of 20 poses available in the full set of miniatures currently available on the Galactic Armory Patreon until June 1st 2024: https://patreon.com/galacticarmory The full set is also…
I pulled the 3d model from the game and started modeling it, because nobody should have to pay for 3d models here it is, in its unfished glory! A few more edits will be coming, however if someone can get this version to print (I'm getting…
The Breacher is a 3d printed Nerf tube-magazine shotgun blaster that fires and ejects Silly Shells! It's spring powered, with a pump action prime. Yes, it actually fires multiple darts at once! READ THE "Print Info" SECTION of this…
“What are Silly Shells?”: Silly Shells are an ecosystem of 3D printed shotgun shells for homemade Nerf-style blasters! There are many, many different shells to use in each blaster, allowing one blaster to fire a wide variety of ammo types…
Spread managed democracy across the galaxy and display your allegiance with this Helldiver Dogtag approved for FREE download from the Super Earth Ministry of Truth. The SELLING of this print is NOT APPROVED by the MINISTRY OF ARMED FORCES…
I have found some hard edges that were supposed to be smooth V1.1 addresses most of that. If I find time, I will try to fix the air intake holes, there are many broken triangles hiding inside I have it printed! Scaling it to 1000% was a…
Battle Axe is a 3d printed Nerf shotgun blaster that fires and ejects Silly Shells! Spring powered, pump action prime. Yes, it actually fires multiple darts at once! Changelog is at the bottom of the description text. Most recent update:…
The Model is scaled to MY head. You will need to make your own measurements and scale it to yours. I have a big head so you have been warned. The parts have non manifold edges you will have to right click them and repair them in the…
Wildstyle is a Nerf-style shotgun pistol that uses Silly Shells! Wildstyle is loaded one shell at a time, and it has a manual ejection lever that flings the shells out of the blaster. Firing Demo: Blaster Overview: Please refer to the…
Eagle back from the nest! Help spread managed democracy throughout the stars, by printing out and assembling this model kit! Based on the Eagle multirole fighter from the video game Helldivers 2 . A fairly detailed model compared to past…
Helldivers skin adapted to Dummy 13 frame. The original Dummy 13 frame is required, with these changes: print two more “frame clavicle v3”. replace the “frame neck” with the “short frame neck” version. replace the “frame hips” with the…
This is the second iteration of my Bile Titan print from Helldivers 2
Plaque for the 500kg Bomb stratagem UPDATE: 3/4/2024: Added STL files UPDATE 3/5/2024: Added V2 files that includes some fixes for misc. symmetry and centering of objects, as well as updates to the stratagem model itself to be more…
A 12 gauge shotgun shell, also known as 12ga or 12G shotshell, is a centerfire shotgun cartridge. Centerfire shotgun shells were designed in the mid 1800s. Includes 4 lengths: 2 3/4in (most common, 2.75in, 61mm), 3in (67mm), 3 1/2in…
I loved the original dog tag so made a variation on the theme using the Hell Commander rank badge. Printed on a Bambu Lab P1S with the 0.08mm extra fine setting, iron top layers.
Collection of 29 Helldiver helmets that were pulled from the game by the hard working folks at The Helldivers Archive! I merely converted the files to STL and fixed some errors for printing. These files may contain errors, and require…
I have created a simple CAD model of the P - 2 Peacemaker This is my first model in this direction, so I don't have a lot of experience yet I would be very happy about feedback as I said I don't have much experience yet and if there are…
Replica of Good Samaritan Gun from Hellboy movie. Scale 1:2. Magnetic closure mecchanis with a 3x1mm neomidium magnets and glued using Milliput for a perfect alignment. With rotating gun drums and removable bullets. The optional…
I paused at line 45 and changed colour. I painted the eyes, bow, nose and whiskers. Printed using PLA Printed without supports.
This a universal name tag blank template which can be customized.
This is the Goblin, a single shot break open Silly Shell fed foam blaster. It can fire any ammunition type that can fit in a Silly Shell; you'll get solid performance from multi-dart shells, up to over 200 fps out of a sniper shell. You…
Remix de: https://www.thingiverse.com/thing:4772175 Sin logo, para gastar menos plastico. Lo imprimo a 98.5% para que calce sin esfuerzo. 15-20% 0.2
Be careful when removing supports on the right arm, it is sort of weak and can break easily.
now you can make the best gun in the game. uses a 1/4 in dowel as support .may need sanding and gluing. Category: Props
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint This one is a two part bust with a separate base. Supports will be needed for the back of his…
Description Helldiver remix using Dummy 13 version 1.0 frame. Much more poseable than the first version and accessories included. Printing: For the frame parts, print with ABS/ASA/PETG. Do not print the frame with PLA. 0.4mm nozzle, layer…
A DIY portable cyberdeck designed to work with any smartphone up to 13 mm thick, the Modular C‑Deck builds on the original Pixel 3 XL NetHunter C‑Deck with a fully modular design. It features a replaceable phone insert , making it easy to…
Helldivers 2-Fanart bust Personal fanart work from the game Helldivers 2 There were some deviations when making the model, so I just made it an original armor. But still democracy. Due to different printing environments, the finished…
Wanted to make a helldivers cosplay for comic con, found this great model by ZerekMasters that looked perfect. However it had some problems like too many polygons and other misc. errors. Fixed the models up in OrcaSlicer and sliced them…
Second iteration of my Charger sculpt from Helldivers 2
This is a 00 scale (1:76) shell designed to fit the current (2019-present) Hornby or Dapol Terrier Loco chassis with minimal modifications. It is based off of a LB&SCR “E2” however it is obviously shortened and stylized to be a semi…
IF YOU ARE BUYING YOUR HARDWARE KIT FROM BEARSWARES, PRINT THE REMIX! Read the guide before building a Shellfish! PDF in files! The Shellfish: A Silly-Shell blaster that does it all :) This is a spring-powered revolver shotgun/grenade…
This is the fan art of B01-Tactical armor from Helldivers2. The item is a .stl file for a chibi character, designed for 3d printing. Feel free to edit and use it as you wish. Also check out the mechs you can sit the little guy in! EXO-45…
If you like my models check out my patreon page for more exclusive content. https://www.patreon.com/windblatt3d
Wallmount for Shelly BLU Motion device.
I leave you one of my latest Hellboy models. With a height of 20cm, all the details of the model can be seen.
Liber-tea mug modeled like it's made from a 40mm grenade casing. Did make it a little large (more of a stein than a mug) but it can just be rescaled to whatever size you like.
Special thanks to @sugarballs for the Idea! Summary: There are various version of this angled (15°) shotgun shell holder / side saddle available. On the uploaded picture (Maverick 88) I used the 12G_5pcs_25mm_angled_velcro version. As…
Update (--> for Breacher & Battle Axe) --------------------------------------------- Silly Shell with 3x airtight Elite barrels 6x Short Darts / 3x Elite Darts / 18 caliber .50 foam balls Update 30.9.2025: Modified shell, suitable for…
! The model shown in the picture was painted ! Already print-ready. The parts need to be glued together, while the connector helps to find the right position for gluing.The print plate model is a bit tricky to clean up and there will be a…
THE OG CREATOR IS Mafouille on thing verse!
Alrighty, this should finally be wearable now! It's a large model that I have no clue how to cut up to be printable that aren't just clean cuts from PrusaSlicer. The fins are exactly the same as they were in the previous version of this…
How 'bout a nice cup of LIBER-TEA?
Print single color or with one filament change. One size fits all. No Supports. Grippy handle and easy on/off. Try it! Recommended to print with 4 walls, Color change at 9.4mm (Optional) No supports, scale up any size. Seems to work on…
Spiderman PS5 Front Shell Edition
Pre-ordered the HD2 themed PS5 controller so I wanted a cool stand for it. Found 2 files by some talented designers and merged them together & this is what I came up with. *Also works with PS4 & Xbox controller, see images. Layer height:…
Scarlet Spider-Man Inspired face Shell Uses 5mm-X-1mm magnets Face Shell with No Holes is so you can use any magnets you like. Enjoy (5/30/21) There was a issue with scaling on the X axis with a few of the face shells, This is fixed now.…
This is a prototype replacement shell for the Thunder B airsoft grenade, my first test print fits perfectly on my grenade, just make sure to print the filet with a low layer high like 0.1/0.5 for a better seal/fit. You will need the best…
"Of unimproved metal, hot and full" Fortinbras is a fully 3d printed single shot flare blaster that uses absolutely zero hardware other than 1/8th inch elastic (other sizes should work). It fires using stringer shells that I also…
Nazzle 0.4 Relleno 15 Altura de capa 0.28mm
We have the option either use 2 mm steel pins, which need to be hammered in, or ream the holes to 2.5 mm and screw in M3. If you want a nicer finish you can remove the thread from the screws 6 x M3 8 mm can be longer at most they will…
By increasing the thickness of the shell, it was possible to place external antennas and leave room for other modules in the future. Main features: free space in the shell for other modules; fastening only with magnets (8x2 mm); holes for…
Este año para el Hellbot Kids Challenge, me inspiré en el dibujo hecho por Paula, una alumna de primaria para crear este robotito print in place para regalar a los niños en su día! Si querés aprender a hacer este tipo de modelos, te dejo…
Revision history Revison Description Date Rev2 Increased dept of recess for tip ground contact wire to reduce risk of damaging it while inserting the tip. Reduced height of "stand" on the lid to make it easier to mount the grip.…
Two versions included : with long horns and other no horns . Support me on my PATREON and get perks like 2-3 models each month for $5 tier : https://www.patreon.com/3dprintingrealms
Shelly BLU Motion Wall Mount Bracket with adjustable Snap Fit Connection - Staffa di montaggio a parete con attacco a scatto regolabile Hardware: 2 pcs M3 x 5mm Phillips Pan Head Screw DIN 7985 or similar 1 pcs M3 x 10mm Phillips Pan Head…
A 5 shotshell holder for my MMS collection of mounts. This can be used with any of the Belt Modules found on my profile or with any other capable mount using Picatinny. This module is designed to be held onto the belt module by tension,…
Ben Riley inspired Spider-man Face Shell Uses 5mm-X-1mm magnets Face Shell with No Holes is so you can use any magnets you like. Enjoy I will have a mesh sheet uploaded soon for all my face shells. Category: 3D Printing
Hello everyone! This is a 3D printed shell designed to work with the X-Shot Excel Ejector Shell Blaster. I've been having tons of fun with this blaster, and I have several ideas for fun parts to make for it. The first and most obvious…
A 20 gauge shotgun shell, also known as 20ga or 20G shotshell, is a centerfire shotgun cartridge. Centerfire shotgun shells were designed in the mid 1800s. Includes 2 lengths: 2 3/4in (most common, 2.75in, 62mm), and 3in (68mm). Note:…
takes some 1/4 in rods for the handle and rod for the hinge. could use 6mm x 2 mm magnets for the mag as the hole is around 6mm/0.24 inch. had a removable mag, and is split for printing. Category: Props
The eggs have been individually cracked and arranged in an Easter wreath. The eggs are separate objects and can be used individually and/or rearranged. For example, in PrusaSlicer: Right-click on eggs.stl -> Split -> To objects Print…
not perfect but they hold the shells for hand reloading. i put supports on for the eased edges. takes about 2 hrs to print.
Hello, I'm adding a remix of a great bell, compared to the first version the upper part has been redesigned so that the halava holds better and the bell can swing. Inside there is a hook for the heart that swings. A new head was created…
Silly Shell Launcher Attachment fits the Silly SCAR thread and you can also shoot darts through it! Airtight launcher for Silly Shells for 16mm aluminium barrels. Fits all Silly Scar threaded nuts and uses also an o-ring seal to the…
This for trimming off the crimp from a 12 gauge shotgun shell. It uses common utility knife blades. Reverse them and use the other side when it gets dull. It should cut off the crimp about 4mm from the end. Use 3mm screws and nuts for…
Helldivers II Mech using Dummy 13 joints and frames
Hi! This is a remix to a model, splitting it into two seperate parts. It's easier to print on smaller machines now (; Please Like and comment if you enjoy (: If you want to split it into objects , go into the objects tab, and click split…
A .410 bore shotgun shell, also known as .410 shotshell, is a centerfire shotgun cartridge. Centerfire shotgun shells were designed in the mid 1800s. Includes 2 lengths: 2 1/2in (most common, 2.5in, 60mm), and 3in (72mm). Note: Shotgun…
Eggshell pot Can be used as a planter, for dry/artificial plants, for decoration or as an LED tea light. .. or something completely different Version freely selectable: top edge: jagged or curvy Wall thicknesses: thin - 0.4mm for…
I modeled this hello kitty keychain for a friend of mine. Didn't pay attention to small details, but there are no imperfections at small scales.
This shell holder can be clipped into belts or molle webbing or whereever else you might find space for it, it holds fairly firmly and the shells cant slide out due to the holder grabbing into the little extraction groove.
Instrucciones: Alineá e insertá la mitad exterior con los precintos colocados. Insertá la mitad interior enroscándola a través de la rosca. Cortá los precintos. ¡Disfrutá tu nuevo carrete de filamento! No requiere imprimir con soportes.…
Another revolver for the 13s, this time it's Hellboy's. P.S. Is it too small?
