Turntable For Airbrush and Spray-Painting—608 Ball Bearing Compatible
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A small (175mm x 175 mm) turntable for spray-painting and airbrush work. Sized for a 608 ball bearing.
- Rating
- 5 / 5
- Likes
- 20
- Downloads
- 122
- Makes
- 3
- Views
- 526
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
A small (175mm x 175 mm) turntable for spray-painting and airbrush work, modeled with an A1 Mini plate size in mind. Scaled for a 608 ball bearing—I used this printed 608 bearing by TechTom (Printables link), as it works well enough after some loosening up.
Top surface of the turntable has 11 evenly-spaced 3mm holes for elevating small clamped parts for painting or drying (Dragon Clips by JAV3D on Printables fit with some force). Holes Sharpied for contrast since I'm down to my last roll of filament and it happens to be translucent.
The turntable is so light it scoots when turned unless sufficiently weighted/stuck. I use poster tack to stick the base to the box I'm painting into.
This YouTube video shows rotation with larger parts (4-hole Ocarina by Julius3E8 on Thingiverse; my Crab) on a printed bearing. Wobbles a bit, but as long as the load is somewhat-balanced, it holds up and turns just fine.