1 / 11
BigTreeTech ADXL345 Accelerometer Side Mount for Creality Sprite Extruders. Captive mounting screw design.
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount a BigTreeTech ADXL345 to the side of your Sprite Extruder with a single screw. Fits in with other hotend mods.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 65
- Makes
- 0
- Views
- 375
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Big Tree Tech USB-C ADXL345 Accelerometer Side Mount for Creality Sprite Extruders. Mounts using a single M3 countersunk screw. Uses a thin profile that should fit in with your other Sprite hotend modifications installed. The mounting screw uses a “captive” design so it stays with the print and does not fall out.
You will need:
- One M3 x H4 threaded heat insert
- One M3 x 6 Cap Head screw
- One M3 x 4 counter sunk screw
- Big Tree Tech ADXL345 USB-C Accelerometer
- Lightly hammer the M3 x 4 counter sunk screw into the print so it stays locked in the part (this prevents the screw from falling on the floor when removing the Accelerometer off the hotend).
Mount Accelerometer on the Sprite where the pictures show.