APN-30 Replacement Spur Gear
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement Spur gear for a Towa APN-30 Label Applicator
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 65
- Makes
- 0
- Views
- 280
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial
On my first day at the range with the great Towa APN-30 Label Applicator I suddenly (after dropping it on the handle) had to squeeze it multiple times to get a sticker out. It only got worse and eventually was completely locked up. After opening it up at home I found four teeth had been broken off of the spur gear. Unable to find a replacement part after minutes of not looking I decided to make my own. I read online that this is a common problem so hopefully this helps someone else.
I printed with supports in PLA+
This is a user-created, unofficial 3D model for a replacement part based on measurements from an original component. It is not affiliated with or endorsed by TOWA Seiko Co., Ltd. or any other manufacturer. Use at your own risk; verify compatibility and safety before installation. This model is shared for personal, non-commercial repair purposes under right-to-repair principles and may not be used in violation of any intellectual property rights.