1 / 3
Digispark rev3 holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small Digispark case. I needed the case so i quickly designed one and thought i could upload it here too. The…
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 65
- Makes
- 0
- Views
- 735
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
Small Digispark case. I needed the case so i quickly designed one and thought i could upload it here too. The screwhole in the back is for securing the board and mounting the case, M3 or M4 screw will fit, with printed standoff on the back.
I've printed them with support only on bed, because of the standoff. The gap where the usb goes in is bridgeable.
Print Settings
Printer:
Prusa Mini+
Rafts:
No
Supports:
Yes
Resolution:
200
Infill:
20
Filament:
Prusament Any
Any
Category: Electronics