Guitar Pick Selection
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
It should be fairly obvious that material choice and print settings allow basically an infinite number of variations to every pick in the set. Flex will be influenced by the filament choice, wall count, the orientation of layer lines, and just about everything else during the print. And that's without getting into resizing, either uniform or per axis!
And then … if you want to get a little more wild, try reducing top and bottom shell layers to zero. This will allow your infill to show thru, with another zillion options to work with.
Have fun, rock on!
The four picks shown here were printed in silk PLA at 0.08mm layers with an 0.4 nozzle on a smooth plate. I printed all four at the same time with a modifier on the honeycomb pick set to 0 top/bottom shell layers and 15% honeycomb infill.
If you want a custom logo or text embossed or inlayed, join my Club and let me know what you need!!!