One Piece - Straw Hat Pirates - Zoro Jolly Roger Clock Face with Clock Mechanism Housing!
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Zoro Jolly Roger clock face with cutout for a clock mechanism to slide in the back.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 58
- Makes
- 0
- Views
- 218
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
One Piece - Straw Hat Pirates - Zoro Jolly Roger Clock Face with Clock Mechanism Housing!
This clock was originally designed as a companion piece to the Luffy Jolly Roger clock face design (also available here on Printables!). The same buddy that wanted the original Luffy design asked if I could do a Zoro one, too, so I took him up on the request.
Due to copyright and IP laws, I'm not able to sell these clocks, so I'm giving the files away to anyone who wants them for personal use only. There is an .stl and a .3mf file available. I'd recommend tweaking the settings on the .3mf to fit your printer!
The provided .3mf file contains multi-color painting for 5 colors, as my MMU only supports 5 colors. The Zoro jolly roger I modeled the clock after contains more than 5 colors (green bandana, blue details on one of the swords). I substituted colors as best I could while still maintaining the 5-color limit. If your printer handles more colors, or you want to pause the print and insert the correct colors, be my guest, but I think this 5-color version is a really good compromise!
The clock face is designed to fit a specific clock mechanism that I purchase from Amazon. The item is named “EMOON 15 Pieces Clock Mechanism Replacement Kit with 16 Pack Hands, Silent Sweep Clock Motor Kit Battery Operated for DIY Repair Replacement (Thread Length 1/2 in)” While the clock is designed to fit this specific clock mechanism, it does also fit many other mechanisms available online. I cannot guarantee other mechanisms will fit, however.
Clock Hands included are also designed to fit on the above specific clock mechanism, and it is not very likely they will fit on other mechanisms.
Recommended Print Settings:
- TEST PRINT TO BE CERTAIN YOUR CLOCK MECHANISM FITS THE HOUSING
- 5% Gyroid Infill
- Grid-style supports to fill the clock mechanism void