1 / 1
Heat Set Insert mod for the tool mounts on the LowRider 4 CNC Core
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Don't like the push in M5 nuts, prefer heat set inserts?
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 62
- Makes
- 0
- Views
- 594
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I modded the core to fit M5 heat set inserts in the 4 tool mount nut holes.
I included a printable test part to see how it fits for you, before you print the entire core.
I suggest pushing in the inserts and putting a m5 screw in as soon as possible to make sure they cool straight. Also, since you will be giving up the nyloc I recommend a low hold threadlocker as the tools vibrate a lot.
The inserts get pushed in from the back (Belt side) and do not go all the way to the surface (tool side).