Prusa Core One anti de-spooling unit / Abrollendes Filament
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.62 – €1.98 net (excluding VAT)
For file: Prusa Core One anti de-spooling unit_CoreOne_0.4n_0.28mm_PETG_COREONE_1h19m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.80 excluding VAT (range midpoint).
- Weight reported by the author
- 35 g
- Print time reported by the author
- 1.31 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Volle Spulen, welche sich selbst abrollen und dann zum Problem werden! Full spools which unwinds itself and cause issues
- Rating
- 5 / 5
- Likes
- 30
- Downloads
- 83
- Makes
- 3
- Views
- 795
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution
Hello together,
sometimes I have the issue that a full spool at the Prusa Core One leads to some troube with self unwinding layers. Lets call it de-spooling. I had one failed print because of that problem.

To reduce/avoid this problem from happening, I created an anti de-spooling unit. It comes with magnets to mount on the case of a Core One. This creates enough tension/friction to avoid this issue.
You will need 15 magnets with 8x3mm size per each unit. -→ Link 8x3mm magnets
The magnets fit very tight without glue and will snap in with some force!

I am using currently 2 of those units with success.

Print settings:
- PETG
- 0,28mm layer height
- 25% Infill with gyroid
- no supports
-------------------------------------------------------------------------------------------------------------
Hallo zusammen,
manchmal habe ich am Prusa Core One das Problem, dass volle Spulen sich selbst abrollen. Ich hatte deswegen bereits einen Fehldruck.

Um das Problem zu reduzieren/vermeiden habe ich eine Anti Abroll-Vorrichtung gebastelt. Es wird mit Magneten versehen um es an das Gehäuse des Prusa Core One zu hängen. Dadurch wird genug Spannung/Reibung aufgebaut um das Problem damit zu vermeiden.
Pro Vorrichtung werden 15 Magnete der Größe 8x3mm benötigt. -→ Link 8x3mm Magnete
Die Magnete sitzen sehr fest und schnappen mit etwas Kraft und ohne Kleber in die Öffnungen!

Derzeit verwende ich 2 Vorrichtungen und das klappt ohne Probleme.

Einstellungen Drucker:
- PETG
- 0,28mm Schichthöhe
- 25% gyroid Füllung
- keine supports