Audi A3 (8P) Phone Mount
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.60 – €0.73 net (excluding VAT)
For file: Audi A3 8P Phone Mount_0.2mm_PETG_MK3S_47m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.66 excluding VAT (range midpoint).
- Weight reported by the author
- 6 g
- Print time reported by the author
- 47.4 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A simple phone mount for the Audi A3 8P model that fits an empty switch position in the central dashboard console.
- Rating
- 5 / 5
- Likes
- 20
- Downloads
- 135
- Makes
- 1
- Views
- 2,435
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed a new phone phone mounting solution in my trusty A3 Sportback.
I had been using a Celly vent-mounted magnetic holder, but this ultimately caused damage to the vanes of the air vent, so I designed this ‘plug-and-stem' holder to fit one of the empty switch positions in the central dashboard above the radio (see picture).
A small printed adapter washer allows me to use the business-end of the magnetic mount with the new holder. I replaced the screw of the Celly mount with a slightly longer one that screws in through the back of the ‘plug’ holder to keep everything together.
The design could be more sophisticated of course, but I just needed something simple that worked and didn't consume too much time in the making!
The Fusion360 model file is posted in case someone wants to adapt the design. I printed in PETG but PLA would work just as well.
Enjoy!