1 / 1
FLP-02 Booster - Modified Catch
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modified catch for the FLP02 - Booster
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 17
- Makes
- 0
- Views
- 133
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Modified catch for the FLP-02 Booster, altering from the original stock part by adding 5.5mm hole recesses in the catches and catch housing so that the springs don't slip during operation. A 5mm spring with a 0.5mm wire thickness at 20-25mm length would suit.
Printing with at least 85% infill is recommended for increased rigidity, however most users will probably go 100% in line with other catch designs with the current 3D printed blaster ecosystem.
Please note: The remix is based off the metric files of the original blaster.
Edit History
- 22/08/2025 Added V2.0 of the catch housing, which includes a fence post that separates the catches and prevents them from rubbing each other. Removed the original pictures that showed the older catch housing.
- 26/08/2025 Amended catch spring length, verified that a full 0.5x25mm compression spring will work.