1 / 1
Troodon 2.0 Pro Badge Retractor Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
x1 M3x5x4 heatset insert and x1 M3x8mm screw
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 10
- Makes
- 0
- Views
- 144
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Public Domain
Install the heatset insert in the hole of the mount.
Thread the longer screw through a side or top panel while holding the mount on the opposite side of the hole inside the chamber of the printer.