1 / 3
3s Sim pedals
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3s Super Simple Ssimpedals is simple, fully 3d printed simpedals based on load cell modules and arduino promicro
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 24
- Makes
- 0
- Views
- 170
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
i use 5kg (75mm) cell on throttle and clutch and 20kg (80mm) on brake.
Need to use some M4 screws and some springs. Springs i used was 20x80x1.5mm
Also u need to tap ungroup on model and remove loadcell model to print
Thx to vospascal for arduino pedalbox
https://github.com/vospascal/pedal-arduino