1 / 3
Attic Hatch Sensor
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This sensor can detect whether the attic hatch is open or closed in a KNX system using a sensor and an MDT interface.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 6
- Makes
- 0
- Views
- 54
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This sensor can detect whether the attic hatch is open or closed. For this purpose, a pushbutton (Marquardt 1117.0206) is used together with a KNX binary input or a pushbutton interface (MDT BE-02001.02).
Print settings
- general settings
- 0.2mm layer height
- random seam position
- 2 walls
- monotonic top/bottom surface
- 5 top/bottom layers
- 10% gyroid infill (optionally infill combination)
- no supports
- optionally add fuzzy skin for the outer shell of the main case either by printing it or adding fuzzy_skin.step as part of case.step and us it as a modifier for partial fuzzy skin.
CAD files
You can access the original model at onshape.com.