1 / 2
Vernier caliper tool wall holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Made for a Mitutoyo Vernier Caliper with Thumb Clamp, but should work with most calipers.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 26
- Makes
- 0
- Views
- 135
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
For the Mitutoyo Vernier Caliper with Thumb Clamp 0-150mm, 0,05mm, metric model (Code Nr.: 531-101), should probably work with most calipers.
I bolted this holder to my tool wall (has 10x10 rectangular holes with 38 mm distance) with @MagnarTharalds_98135 Square nut, the holder takes two M4 x 16 or longer screws.
Print it from PLA, 2 or 3 walls with atleast 20% infill. No need for support, just print it standing upright.