A better Lock & Lock Filament Dehydrator
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is my filament dehydrator. There was no dehydrator on thingiverse which matched my needs so I made my own one.…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 9
- Makes
- 0
- Views
- 421
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
This is my filament dehydrator. There was no dehydrator on thingiverse which matched my needs so I made my own one.
THINGS YOU NEED
1x Lock & Lock HSM948H like this: https://www.amazon.de/gp/product/B004J18IAA/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Bottom:
4x M4 8mm - 12mm screw (over 8mm or under 12mm ;) )
1x M4 30mm (for the middle to hold the spool holder)
2x 608 (ZZ) bearings, should be ones with low friction for easy twisting of the spool
Stand:
2x M4 30mm screw
2x M4 20mm screw
And some 100g of silica gel. I would prefer the orange one which goes green if its soaked.
For the feeder I used this: https://www.thingiverse.com/thing:2116535 but feel free to use what you want. Insert the M10 PTFE coupler, then warm it up with a heat gun and press it to the Lock & Lock for a good fit, let it cool down, drill the holes and you are good to go.
The Spool holder is made for 52mm spools and up to 1kg.
ATTENTION KIDS:
The Spool Holder is made to press fit the 608 bearings, depending on your printers accuracy you probably need to sand it down a LITTLE BIT if the bearings don't fit in. I made a 608 bearing press fit tool so you can GENTLY(!!!!!!!) hammer them in ;)
The adapter is here: https://www.thingiverse.com/thing:3830407
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20%
Filament: Das Filament PLA
Category: 3D Printer Accessories