1 / 3
Biqu microprobe sb carriage mount (for uhf toolheads)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Quick and easy mount for a microprobe.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 21
- Makes
- 0
- Views
- 106
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- GNU General Public License v3.0
Mount for Biqu Microprobe
Made for the Rapid Burner toolhead https://github.com/chirpy2605/voron/tree/main/V0/Rapid_Burner
Designed for cw2/sb carriages. Other UHF toolheads should be compatible (a4t, stealthburner remixes etc.) but remain untested. Regular flow hotends/variants are not supported.
No need to cut or trim the probe, just connect the cable, screw the probe in and install to carriage.
Use two M2.5x5 screws that came with your microprobe and two M3x20 screws to mount it to the x carriage. Insert two m3 inserts into probe_retainer_bracket as usual.
x_offset: 2
y_offset: 19.5