1 / 2
Nikon camera lid for D3500
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This lid fits on the D3500 camera acting as a replacement lid for the original.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 44
- Makes
- 0
- Views
- 247
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
My original Nikon D3500 lens cap broke (one of the plastic springs broke apart).
So I decided to remix the D3100 lens cap to one for the D3500 by scaling it up a bit. I installed it not with the printed springs but with actual springs recovered from a pen.
Assembly
- Print the models
- Get yourself a pen spring and some glue
- Cut the spring in half. You might even want to shorten each half a bit that it sticks out not to far. Check this image as to where I have let the spring come (just a mm or 2 before the extended border).
- Glue each pring more or less in the middel (note at this stage my springs are a bit too long, I ended up in disassembling it and cutting them shorter as explained above).
- Then snap in each side, and done ✅
