Shinobi Lightning Mask
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My first model in a series of high-quality Shinobi masks — bold design, durable PETG, perfect for cosplay or display.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 2
- Makes
- 0
- Views
- 39
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Masks
- License
- Standard Digital File License
3D printed model are allowed to be sold.
Material: PETG (recommended for durability, flexibility, and a glossy finish).
Layer Height: 0.2 mm (balance between surface quality and print time).
Infill: 15–20% is enough for strength without excess weight.
Perimeters: At least 3 walls for rigidity.
Supports: Enable supports for the eye cutouts and any steep overhangs.
Bed Adhesion: Use a glue stick or PEI surface — PETG can stick too strongly to bare glass.
Cooling: Minimal part cooling (20–30%) to prevent layer adhesion issues.
Print Speed: 45–55 mm/s for best surface finish.
Post-Processing: Light sanding and clear coat will enhance gloss and durability.